Description
Dimensions
1.25″ (31,8 mm) ID
1.44″ OD
2″ Long
These are for use with the 1.25″ ID Pin.
In stock (can be backordered)
$19.95
This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$19.95
Weight | 0.2125 lbs |
---|---|
Dimensions | 2 × 1.44 in |
Bobcat | Bobcat 520, Bobcat 530, Bobcat 540, Bobcat 542B, Bobcat 543, Bobcat 553, Bobcat 630, Bobcat 631, Bobcat 632, Bobcat 641, Bobcat 642, Bobcat 643, Bobcat 645, Bobcat 653, Bobcat 730, Bobcat 731, Bobcat 732, Bobcat 741, Bobcat 742, Bobcat 743, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat 843, Bobcat 853, Bobcat 863 |
1.25″ (31,8 mm) ID
1.44″ OD
2″ Long
These are for use with the 1.25″ ID Pin.
Weight | 0.2125 lbs |
---|---|
Dimensions | 2 × 1.44 in |
Bobcat | Bobcat 520, Bobcat 530, Bobcat 540, Bobcat 542B, Bobcat 543, Bobcat 553, Bobcat 630, Bobcat 631, Bobcat 632, Bobcat 641, Bobcat 642, Bobcat 643, Bobcat 645, Bobcat 653, Bobcat 730, Bobcat 731, Bobcat 732, Bobcat 741, Bobcat 742, Bobcat 743, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat 843, Bobcat 853, Bobcat 863 |
Bushing for Tilt Cylinder Rod End.
River Valley Machine, LLC sells both Left and Right Wedge Repair Kits…
Modify your existing equipment so it can be used on your skid steer or compact tractor.
Fits virtually any skid-steer or compact tractor manufactured after 1995 with Quick-Attach. Will fit some older models equipped with Quick Attach.
Quick attach plate is made of 5/16″ Grade 50 Steel
This Pivot Pin is used between the Lower Tilt Cylinder and your Bobcat® Bob-Tach.
This is a solid pivot pin – the pin does not have a grease zerk hole.