Bobcat 530
Showing 1–16 of 23 results
-
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bob-Tach
$5.95 Add to cartBolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bob-Tach
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 661846B
$5.95 -
Bushing [6562067] (Press-In/Weld-On) for Bobcat® Bob-Tach
$19.95 Add to cartBushing [6562067] (Press-In/Weld-On) for Bobcat® Bob-Tach
Bushing (Press-In/Weld-On) [6562067] for Bobcat® Bob-Tach
This bushing is press-fit into your Bobcat® Bob-Tach. In certain cases of excessive wear, these bushings can be welded in as well.
Bushings wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$19.95 -
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bob-Tach
Sale! Original price was: $34.95.$32.95Current price is: $32.95. Add to cartBushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bob-Tach
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bob-Tach
This Bushing secures the Pivot Pin between your Single-Tilt Cylinder and the Bobcat Bob-Tach® / Quick-Attachment…
These bushings wear out over time causing a lot of play. Replacing these bushings will help make your Bobcat like new.Note: Price is for one (1) bushing; Two (2) bushings required per machine…
Original price was: $34.95.$32.95Current price is: $32.95. -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
$19.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bob-Tach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$19.95 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
$35.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$35.95 -
Bushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bob-Tach
$34.95 Add to cartBushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bob-Tach
Bushing / Reducer (Tapered) [6731254] for Loader Arm | Bobcat® Bob-Tach
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$34.95 -
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Pivot Pin (Tapered) [6707042] for Loader Arm | Bobcat® Bob-Tach
$29.95 Add to cart -
Pivot Pin (Tapered) [6732012] for Loader Arm | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (Tapered) [6732012] for Loader Arm | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6732012] for Loader Arm | Bobcat® Bob-Tach
REPLACEMENT for Bobcat Part #: 6707042
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing these pins can help make your Bobcat® Bob-Tach operate like new.
$29.95 -
Pivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
$28.95 Add to cartPivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
Pivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Lift / Loader’s Arms and the Lift Cylinder. Pivot Pins simply wear out over time causing issues with your Loader’s Arms.
Replacing these pins can help make your Bobcat® operate like new again.
$28.95 -
Pivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
$34.95 Add to cartPivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
Pivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Lift / Loader’s Arms and the Single-Tilt Cylinder. Pivot Pins simply wear out over time causing issues with your Loader’s Arms.
Replacing these pins can help make your Bobcat® operate like new again.
$34.95 -
Quick-Attach Handle (Left) [6563106] | Bobcat Bob-Tach
$39.95 Add to cartQuick-Attach Handle (Left) [6563106] | Bobcat Bob-Tach
Quick-Attach Handle (Left) [6563106-LH] | Bobcat Bob-Tach
Bob-Tach handles wear out over time… Replacing them can help keep your Bob-Tach operating like new.
When sitting in your machine this would be the Left Hand Handle.
$39.95 -
Quick-Attach Handle (Right) [6563107-RH] | Bobcat® Bob-Tach
$39.95 Add to cartQuick-Attach Handle (Right) [6563107-RH] | Bobcat® Bob-Tach
Quick-Attach Handle (Right) [6563107-RH] | Bobcat® Bob-Tach
Bob-Tach handles wear out over time… Replacing them will hep keep your Bob-Tach operating like new.
When sitting in your machine this would be the Right Hand Handle.
$39.95 -
RVM® Handle Stud Repair / Rebuild Kit | Bobcat® Bob-Tach
$5.15 – $18.95 Add to cartRVM® Handle Stud Repair / Rebuild Kit | Bobcat® Bob-Tach
RVM Handle Stud Repair / Rebuild Kit | Bobcat® Bob-Tach
The Handle Stud supports the handle and handle spring.
The handle studs wear out over time and replacing them will help keep the handles tight and help keep your Bob-Tach operating like new.
Available As Complete Kit.
$5.15 – $18.95
Showing 1–16 of 23 results