Bobcat® T Models
Showing 1–16 of 83 results
-
Bobcat® T110 (16)
-
Bobcat® T140 (41)
-
Bobcat® T180 (Radius Lift Path) (41)
-
Bobcat® T190 (41)
-
Bobcat® T200 (35)
-
Bobcat® T250 (Radius Lift Path) (36)
-
Bobcat® T300 (34)
-
Bobcat® T320 (35)
-
Bobcat® T450 (18)
-
Bobcat® T550 (23)
-
Bobcat® T590 (23)
-
Bobcat® T595 (8)
-
Bobcat® T630 (Radius Path Lifter) (26)
-
Bobcat® T650 (Vertical Lift Path) (26)
-
Bobcat® T740 (12)
-
Bobcat® T750 (26)
-
Bobcat® T770 (24)
-
Bobcat® T870 (20)
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Access Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Access Cover Clean-Out Plates [6716010] for Bobcat®
DISCONTINUED PRODUCT | RVM Replacement: 7240780
$24.95 -
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
$4.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$4.95 -
Bolt [47C1088] for Lower Bob-Tach | Bobcat®
Sale! Original price was: $10.49.$9.95Current price is: $9.95. Add to cartBolt [47C1088] for Lower Bob-Tach | Bobcat®
Bolt [47C1088] for Lower Bob-Tach | Bobcat®
Lower Bob-Tach Bolt : 5/8
Original price was: $10.49.$9.95Current price is: $9.95. -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6708517] for Loader Lift Arm Boom | Bobcat® Bob-Tach 873 | 883 | A220 | 863 | 864 | T200
$25.95 Add to cartBushing [6708517] for Loader Lift Arm Boom | Bobcat® Bob-Tach 873 | 883 | A220 | 863 | 864 | T200
Bushing 6708517 for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is fit into the front lower end of your Loader Arms. These bushings wear out over time, causing a lot of play in your Bobcat. When required, replacing these bushings will keep your machine operating like new.
$25.95 -
Bushing [6711404] (Weld-On) for Bobcat® Bob-Tach
$59.95 Add to cartBushing [6711404] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6711404] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bob-Tach®.
$59.95 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$25.95 -
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
$32.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bob-Tach.
When replacing your old bushings in your Bob-Tach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$32.95 -
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
$41.95 Add to cartBushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your Loader Arm’s tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly.
$41.95 -
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
This bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and will help keep your machine operating like new.
$25.95 -
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
$92.95 Add to cartBushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$92.95 -
Bushing [6729353] (Weld-On) | Bobcat® Bob-Tach
$92.95 Add to cartBushing [6729353] (Weld-On) | Bobcat® Bob-Tach
Bushing (Weld-On) [6729353] | Bobcat® Bob-Tach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bob-Tach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$92.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95 -
Bushing [6731979] (Weld-On) for Bobcat® Bob-Tach
$64.95 Add to cartBushing [6731979] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6731979] | Bobcat® Bob-Tach
This bushing is welded onto your Bob-Tach. Bushings wear out over time causing a lot of play in your Bob-Tach.
Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$64.95
Showing 1–16 of 83 results