Description
Dimensions
3″ OD w/ Tapered Hole
5.125″ Length
For Use With:
1.75″ Diameter Pin [6729358]
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
In stock (can be backordered)
$89.99
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$89.99
| Dimensions | 5.125 × 3 in |
|---|---|
| Bobcat | Bobcat A300 (All-Wheel Steer), Bobcat S220, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T250, Bobcat T300, Bobcat T320 |
Additional information
| Dimensions | 5.125 × 3 in |
|---|---|
| Bobcat | Bobcat A300 (All-Wheel Steer), Bobcat S220, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T250, Bobcat T300, Bobcat T320 |
Only logged in customers who have purchased this product may leave a review.
Contact River Valley Machine
Questions, Comments?
You may also like…
-
Pivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bobtach
Sale! $29.95 Add to cartPivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bobtach
Pivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bobtach
This pin is used between your Lift / Loader Arms and the Bobtach. These pins wear out over time causing a lot of play in your Bobtach. Replacing these pins can help make your Bobcat® operate like new.
RVM Tips & Recommendations: When changing your Pivot Pin, River Valley Machine encourages you to also replace your Bushing (Press-In) [7139943]
$29.95
Related products
-
RVM® Handle Kit [RH] | Bobcat® Bobtach
$69.99 Add to cart -
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Door Latch (Rear) [6670867] | Bobcat®
Sale! $32.95 Add to cartDoor Latch (Rear) [6670867] | Bobcat®
Door Latch (Rear) [6670867] | Bobcat®
Door Latches & Strikers simply wear out over time causing safety concerns. Replacing them can help keep your door operating like new – safely!
$32.95
Reviews
There are no reviews yet.