This bushing is welded into your Bobtach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bobtach®.
Only logged in customers who have purchased this product may leave a review.
Stock Photo of Bobcat 853, except this adapter mounts to the outside of Boom Arm the same as OEM.
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bobtach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bobtach cylinder.
One of the most common failures of a Bobcat Bobtach is the top portion of the Bobtach itself – OEM material thickness is only 1/4″ – they simply wear thin, bend and break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our RVM Rebuild & Repair Panel Kit, you can replace these portions of your Bobtach to help make it appear & operate like new again – without spending $1300+ buying a new Bobtach.
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
A common failure of a Bobcat® Bobtach is the top portion of the Bobtach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our Quick-Attach Mount Plate / Panel Repair Kit, you can replace actually replace the damaged portions of your Bobtach to help make it appear & operate like new again – without having to spend $1300+ buying a replacement Bobtach.
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bobtach operate like new again.