In stock (can be backordered)
$84.95
One of the most common failures of a Bobcat Bobtach is the top portion of the Bobtach itself – OEM material thickness is only 1/4″ – they simply wear thin, bend and break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our RVM Rebuild & Repair Panel Kit, you can replace these portions of your Bobtach to help make it appear & operate like new again – without spending $1300+ buying a new Bobtach.
$84.95
| Bobcat | Bobcat 863, Bobcat 864, Bobcat A220 (All-Wheel Steer), Bobcat T200 |
|---|
This is for the Left Side Panel (while you are sitting in your machine).
| Bobcat | Bobcat 863, Bobcat 864, Bobcat A220 (All-Wheel Steer), Bobcat T200 |
|---|
One of the most common failures of a Bobcat Bobtach is the top portion of the Bobtach itself – OEM material thickness is only 1/4″ – they simply wear thin, bend and break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our RVM Rebuild & Repair Panel Kit, you can replace these portions of your Bobtach to help make it appear & operate like new again – without spending $1300+ buying a new Bobtach.
When sitting in your machine, this Kit is for the Right Side.
Stock Photo of Bobcat 853, except this adapter mounts to the outside of Boom Arm the same as OEM.
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bobtach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bobtach cylinder.
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bobtach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bobtach cylinder.
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bobtach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
The Wedge Pin attaches to the handles of a Bobtach. Wedges hold the Quick-Attach to the bucket or attachment. Wedges simply get rusty and worn out over time… Replacing them will help keep your Bobtach operating like new.
When sitting in your machine, this would be the Left-Side Wedge.
