River Valley Machine relies on Flat-Rate Shipping for the majority of our top-quality parts & accessories. RVM is no longer...
Read More
Bobcat® 500 Series
Showing 1–16 of 49 results
-
Bobcat® 500 (1)
-
Bobcat® 520 (4)
-
Bobcat® 530 (23)
-
Bobcat® 533 (22)
-
Bobcat® 540 (27)
-
Bobcat® 542 (2)
-
Bobcat® 543 (27)
-
Bobcat® 553 (48)
-
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
Sale! $3.95 Add to cartBolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT PART #: 661846B
$3.95 -
Bushing [6562067] (Press-In/Weld-On) for Bobcat® Bobtach
$14.25 Add to cartBushing [6562067] (Press-In/Weld-On) for Bobcat® Bobtach
Bushing (Press-In/Weld-On) [6562067] for Bobcat® Bobtach
This bushing is press-fit into your Bobcat® Bobtach. In certain cases of excessive wear, these bushings can be welded in as well.
Bushings wear out over time causing a lot of play in your Bobtach. Replacing these bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$14.25 -
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
Sale! $29.95 Add to cartBushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
This Bushing secures the Pivot Pin between your Single-Tilt Cylinder and the Bobcat Bobtach® / Quick-Attachment…
These bushings wear out over time causing a lot of play. Replacing these bushings will help make your Bobcat like new.Note: Price is for one (1) bushing; Two (2) bushings required per machine…
$29.95 -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bobtach
Sale! $14.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bobtach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bobtach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bobtach. These wear out over time causing a lot of play in your Bobtach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$14.95 -
![Handle Stud [6702958] @ RVM, LLC | River Valley Machine](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6702958-324x324.png)
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale! $11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$11.95 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
$34.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$34.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bobtach
$12.70 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bobtach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bobtach
This Bushing is press-fit into your Bobtach. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.70 -
Bushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Sale! $29.95 Add to cartBushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Bushing / Reducer (Tapered) [6731254] for Loader Arm | Bobcat® Bobtach
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$29.95 -
Bushing [6731979] (Weld-On) for Bobcat® Bobtach
$63.99 Add to cartBushing [6731979] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6731979] | Bobcat® Bobtach
This bushing is welded onto your Bobtach. Bushings wear out over time causing a lot of play in your Bobtach.
Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$63.99 -
Bushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
Sale! $42.95 Add to cartBushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
Bushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
This bushing is press-fit into your 50 Series Bobcat Bobtach. These wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
In certain cases of excessive wear, these repair bushings can be welded in as well.
$42.95 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
$18.94 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$18.94 -
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bobtach
Sale! $5.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bobtach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bobtach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bobtach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$5.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Sale! $8.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bobtach operate like new again.
$8.95 -
Door Latch Striker (Front) [6568047] | Bobcat®
Sale! $14.95 Add to cartDoor Latch Striker (Front) [6568047] | Bobcat®
Door Latch Striker (Front) [6568047] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$14.95 -
Door Latch Striker (Rear) [6715157] | Bobcat®
Sale! $19.95 Add to cartDoor Latch Striker (Rear) [6715157] | Bobcat®
Door Latch Striker (Rear) [6715157] | Bobcat®
Rear Door Strikers wear out over time. Replacing them will help keep your door operating like new.
$19.95 -
Handle Stud [6562013] | Bobcat®
Sale! $15.50 Add to cartHandle Stud [6562013] | Bobcat®
Handle Stud [6562013] | Bobcat®
The Handle Stud supports the Quick-Attach Handle and Handle Spring.
Handle Studs eventually wear out… Replacing them will help keep your handles tight and can help keep your Bobtach operating like new.
$15.50
Showing 1–16 of 49 results