Description
Fits both LH & RH side.
Product may vary from photo/s.
Dimensions
1″ OD (at the base)
2.25″ Length
![Handle Stud [6702958] @ RVM, LLC | River Valley Machine](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6702958.png)
![Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/6702958_Diagram.png)
![Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/85D6_Diagram_Lift-Arm-1.png)
![Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach - Image 4](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/85D6_Diagram_Handle-1.png)
![Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach - Image 5](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/85D6_Diagram_Handle-Bob-Tach-1.png)
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
In stock (can be backordered)
$14.49
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49
Additional information
Contact River Valley Machine
Questions, Comments?
Related products
-
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$25.95 -
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
$24.95 Add to cartPivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for Bobcat Part #: 6700037
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
$24.95
![Handle Stud [6702958] @ RVM, LLC | River Valley Machine](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6702958-324x324.png)