Bobcat® A220
Manufactured by Bobcat® from 2001… The Bobcat® A220 is the first loader to offer both all-wheel steer (AWS) — for low impact operation on sensitive surfaces — and skid-steer for maximum maneuverability, both at the flip of a switch. It is also the first Bobcat loader to feature joysticks for drive control and lift arm operation.
Showing 1–16 of 31 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
$4.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$4.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6708517] for Loader Lift Arm Boom | Bobcat® Bob-Tach 873 | 883 | A220 | 863 | 864 | T200
$25.95 Add to cartBushing [6708517] for Loader Lift Arm Boom | Bobcat® Bob-Tach 873 | 883 | A220 | 863 | 864 | T200
Bushing 6708517 for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is fit into the front lower end of your Loader Arms. These bushings wear out over time, causing a lot of play in your Bobcat. When required, replacing these bushings will keep your machine operating like new.
$25.95 -
Bushing [6711404] (Weld-On) for Bobcat® Bob-Tach
$59.95 Add to cartBushing [6711404] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6711404] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bob-Tach®.
$59.95 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
$19.49 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$19.49 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
$9.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bob-Tach
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bob-Tach operate like new again.
$9.95 -
Door Striker (Front) (Magnetic) [7109664] | Bobcat®
$18.95 Add to cartDoor Striker (Front) (Magnetic) [7109664] | Bobcat®
Front Door Striker (Magnetic) [7109664] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$18.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used between the Lower Tilt Cylinder and your Bobcat® Bob-Tach.
This is a solid pivot pin – the pin does not have a grease zerk hole.
$29.95 -
Pivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
$28.95 Add to cartPivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
Pivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Lift / Loader’s Arms and the Lift Cylinder. Pivot Pins simply wear out over time causing issues with your Loader’s Arms.
Replacing these pins can help make your Bobcat® operate like new again.
$28.95 -
Pivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
$34.95 Add to cartPivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
Pivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Lift / Loader’s Arms and the Single-Tilt Cylinder. Pivot Pins simply wear out over time causing issues with your Loader’s Arms.
Replacing these pins can help make your Bobcat® operate like new again.
$34.95 -
Pivot Pin [6711334] for Loader Lift Arm | Bobcat®
$31.95 Add to cartPivot Pin [6711334] for Loader Lift Arm | Bobcat®
Pivot Pin [6711334] for Loader Lift Arm | Bobcat®
This Pivot Pin is used to attach your Bob-Tach® attachment mounting system to the skid steer loader lift arm.
These pins simply wear out over time causing issues with your Bob-Tach.
$31.95 -
Pivot Pin 6718789 6547595 for Lift / Loader Arm & Lift Cylinder | Bobcat®
$24.95 Add to cartPivot Pin 6718789 6547595 for Lift / Loader Arm & Lift Cylinder | Bobcat®
Pivot Pin [6718789] for Lift / Loader Arm & Lift Cylinder | Bobcat®
This Pivot Pin is used between your Loader Arms and the Lift Cylinder. These pins simply wear out over time causing a lot of play with your Loader Arms. Replacing these pins can help make your Bobcat operate like new.
$24.95 -
Pivot Wedge [6704240] | Bobcat® Bob-Tach
$24.95 Add to cartPivot Wedge [6704240] | Bobcat® Bob-Tach
Pivot Wedge [6704240] | Bobcat® Bob-Tach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bob-Tach’s not using Power Bob-Tach Cylinder.
$24.95
Showing 1–16 of 31 results