River Valley Machine®
Showing 1–16 of 138 results
-
RVM® UNIVERSAL Quick-Attach Systems (54)
-
RVM® UNIVERSAL Quick-Attach Kits (28)
-
RVM® Rebuild & Repair Kits (33)
-
RVM Upgrade Kits (14)
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$21.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$21.95 -
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
Sale! $3.95 Add to cartBolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT PART #: 661846B
$3.95 -
Bolt [47C1088] for Lower Bobtach | Bobcat®
Sale! $8.95 Add to cartBolt [47C1088] for Lower Bobtach | Bobcat®
Bolt [47C1088] for Lower Bobtach | Bobcat®
Lower Bobtach Bolt : 5/8
$8.95 -
Bolt Guide [6562019] | Bobcat® Bobtach
Sale! $9.95 Add to cart -
Bolt Guide [86610166] | Case® / Farmall® / Fiat® / Ford® / New Holland®
Sale! $17.95 Add to cartBolt Guide [86610166] | Case® / Farmall® / Fiat® / Ford® / New Holland®
Bolt Guide [86610166] | Case® / Farmall® / Fiat® / Ford® / New Holland®
REPLACEMENT FOR PART #’s: 394233A1 | 86510868 | 86552285 | 86984419 | 86601599
$17.95 -
Bushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
Sale! $85.95 Add to cartBushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) [6559838-HD] for Loader Arm Boom | Bobcat®
This bushing is welded onto your loader arm Tapered Pivot Pin locations.
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
Our HD Bushing is designed as a significant upgrade to OEM version.
$85.95 -
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
Sale! $29.95 Add to cartBushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
This Bushing secures the Pivot Pin between your Single-Tilt Cylinder and the Bobcat Bobtach® / Quick-Attachment…
These bushings wear out over time causing a lot of play. Replacing these bushings will help make your Bobcat like new.Note: Price is for one (1) bushing; Two (2) bushings required per machine…
$29.95 -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bobtach
Sale! $14.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bobtach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bobtach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bobtach. These wear out over time causing a lot of play in your Bobtach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$14.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale! $11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$11.95 -
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
Sale! $18.95 Add to cartBushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
This bushing is press-fit into the rear of your loader arms. In certain cases of excessive wear these can be welded in as well.
These bushings simply wear out over time causing a lot of play in your Bobcat®. Replacing these Bushings, when required, will help keep your machine operating like new.
$18.95 -
Bushing [6711404] (Weld-On) for Bobcat® Bobtach
Sale! $54.95 Add to cartBushing [6711404] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6711404] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bobtach®.
$54.95 -
Bushing [6713156] (Weld-On) for Bobcat® Bobtach
Sale! $75.95 Add to cartBushing [6713156] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6713156] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing a lot of play in your attachment.
Replacing the bushings, when necessary, can help keep your machine operating like new and is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$75.95 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
$34.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$34.95 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Sale! $22.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bobtach. The bushings eventually wear out causing a lot of play in your Bobtach. Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$22.95 -
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
$39.99 Add to cartBushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
This bushing is welded into your Loader Arm’s tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly.
$39.99
Showing 1–16 of 138 results