Bobcat® S Models
Showing 1–40 of 100 results
-
Bobcat® S70 (7)
-
Bobcat® S100 (19)
-
Bobcat® S130 (54)
-
Bobcat® S150 (50)
-
Bobcat® S160 (51)
-
Bobcat® S175 (55)
-
Bobcat® S185 (57)
-
Bobcat® S205 (52)
-
Bobcat® S220 (Radius Path Loader) (35)
-
Bobcat® S250 (38)
-
Bobcat® S300 (Vertical Lift Path) (39)
-
Bobcat® S330 (34)
-
Bobcat® S450 (20)
-
Bobcat® S510 (25)
-
Bobcat® S530 (25)
-
Bobcat® S550 (26)
-
Bobcat® S570 (26)
-
Bobcat® S590 (26)
-
Bobcat® S595 (11)
-
Bobcat® S630 (Radius Path Loader) (24)
-
Bobcat® S650 (Vertical Lift Path) (23)
-
Bobcat® S740 (10)
-
Bobcat® S740 [Tier 4] (9)
-
Bobcat® S750 (Vertical Lift Path) (24)
-
Bobcat® S770 (Vertical Path Loader) (25)
-
Bobcat® S850 (22)
-
Bobcat® S850 (M-Series) (1)
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$21.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$21.95 -
Access Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Add to cartAccess Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Access Cover Clean-Out Plates [6716010] for Bobcat®
DISCONTINUED PRODUCT | RVM Replacement: 7240780
-
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
Sale!$3.99$2.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$3.99$2.95 -
Bolt [47C1088] for Lower Bobtach | Bobcat®
Sale!$4.99$3.95 Add to cartBolt [47C1088] for Lower Bobtach | Bobcat®
Bolt [47C1088] for Lower Bobtach | Bobcat®
Lower Bobtach Bolt : 5/8
$4.99$3.95 -
Bushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
Sale!$89.99$85.95 Add to cartBushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) [6559838-HD] for Loader Arm Boom | Bobcat®
This bushing is welded onto your loader arm Tapered Pivot Pin locations.
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
Our HD Bushing is designed as a significant upgrade to OEM version.
$89.99$85.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale!$13.99$11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$13.99$11.95 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
Sale!$42.99$36.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$42.99$36.95 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Sale!$24.99$22.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bobtach. The bushings eventually wear out causing a lot of play in your Bobtach. Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$24.99$22.95 -
Bushing [6717260] (Weld-On) for Bobcat® Bobtach
Sale!$32.99$29.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bobtach
Bushing [6717260] (Weld-On) for Bobcat® Bobtach
This bushing is welded into your Bobtach. These wear out over time causing a lot of play in your Bobtach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bobtach.
When replacing your old bushings in your Bobtach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$32.99$29.95 -
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Sale!$54.99$52.95 Add to cartBushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
This bushing is welded into your Loader Arm’s tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly.
$54.99$52.95 -
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
Sale!$24.99$22.95 Add to cartBushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
This bushing is press-fit into your Bobcat® Bobtach. Bushings simply wear out over causing a lot of play in your Bobtach.
Replacing bushings is a whole lot cheaper than buying a new Bobtach, and will help keep your machine operating like new.
$24.99$22.95 -
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Sale!$99.99$92.95 Add to cartBushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$99.99$92.95 -
Bushing [6729353] (Weld-On) | Bobcat® Bobtach
Sale!$109.99$104.95 Add to cartBushing [6729353] (Weld-On) | Bobcat® Bobtach
Bushing (Weld-On) [6729353] | Bobcat® Bobtach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bobtach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$109.99$104.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bobtach
$12.70 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bobtach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bobtach
This Bushing is press-fit into your Bobtach. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.70 -
Bushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Sale!$32.99$29.95 Add to cartBushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Bushing / Reducer (Tapered) [6731254] for Loader Arm | Bobcat® Bobtach
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$32.99$29.95 -
Bushing [6731979] (Weld-On) for Bobcat® Bobtach
$63.99 Add to cartBushing [6731979] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6731979] | Bobcat® Bobtach
This bushing is welded onto your Bobtach. Bushings wear out over time causing a lot of play in your Bobtach.
Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$63.99 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
$18.94 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$18.94 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Sale!$12.99$10.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$12.99$10.95 -
Bushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Sale!$62.99$58.95 Add to cartBushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7136465] | Bobcat® Bob-Tach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$62.99$58.95 -
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Sale!$22.99$20.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$22.99$20.95 -
Bushing [7140168] (Weld-On) for Bobcat® Bobtach
$54.95 Add to cartBushing [7140168] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [7140168] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95 -
Bushing [7148022] (Weld-On) for Bobcat® Bob-Tach
Sale!$59.99$54.95 Add to cartBushing [7148022] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7148022] | Bobcat® Bobtach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment.
Removing your old worn-out bushings and welding in these new bushings, is a lot cheaper than buying a new Bob-Tach®, and can help make your machine operate like new.
$59.99$54.95 -
Bushing [7160425-HD] RVM® HD Bushing (Tapered / Weld-On) for Lift / Loader Arm Boom | Bobcat® Bobtach
Sale!$94.99$84.95 Add to cartBushing [7160425-HD] RVM® HD Bushing (Tapered / Weld-On) for Lift / Loader Arm Boom | Bobcat® Bobtach
RVM® HD Bushing (Tapered / Weld-On) [7160425-HD] for Loader Lift Arm Boom | Bobcat® Bobtach
This bushing is welded into your loader arm / boom tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$94.99$84.95 -
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Sale!$62.99$58.95 Add to cartBushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$62.99$58.95 -
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Sale!$34.99$32.95 Add to cartBushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
This Bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and can help keep your machine operating like new.
$34.99$32.95 -
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Sale!$109.99$102.95 Add to cartBushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 7170610
This bushing is welded into your Bobcat® Bobtach. Bushings simply wear out over causing a lot of play in your Bobtach… Replacing these bushings is a whole lot cheaper than buying a new Loader Arm Assembly, and will help keep your machine operating like new.
Our Weld-On Bushing includes Bushing (Press-In) [7170615]
$109.99$102.95 -
Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
Sale!$79.99$77.95 Add to cartBushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
This Bushing is used on your Lower Bob-Tach. Bushings simply wear out over time, causing a lot of play in your Bob-Tach.
Removing the worn-out old bushings and replacing w/ new bushings from RVM can help make your machine operate like new.
$79.99$77.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Sale!$10.99$8.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bobtach operate like new again.
$10.99$8.95 -
Compression Spring [6713040] for Handle | Bobcat® Bobtach
Sale!$9.99$7.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bobtach
Compression Spring [6713040] for Handle | Bobcat® Bobtach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bobtach operate like new again.
$9.99$7.95 -
Door Striker (Front) (Magnetic) [7109664] | Bobcat®
Sale!$18.99$14.95 Add to cartDoor Striker (Front) (Magnetic) [7109664] | Bobcat®
Front Door Striker (Magnetic) [7109664] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$18.99$14.95 -
Drive Belt Tensioner Pulley [6704391] | Bobcat®
Sale!$74.95$69.95 Add to cartDrive Belt Tensioner Pulley [6704391] | Bobcat®
Drive Belt Tensioner Pulley [6704391] | Bobcat®
$74.95$69.95 -
Exhaust Pipe (Turbo) [6677371] w/ Gasket | Bobcat®
Sale!$74.99$70.95 Add to cartExhaust Pipe (Turbo) [6677371] w/ Gasket | Bobcat®
Exhaust Pipe (Turbo) [6677371] w/ Gasket | Bobcat®
This part is a genuine OEM part – not aftermarket – like our competitors are often offering.
$74.99$70.95 -
Exhaust Pipe (Turbo) [6701151] | Bobcat®
Sale!$62.99$56.95 Add to cartExhaust Pipe (Turbo) [6701151] | Bobcat®
Exhaust Pipe [6701151] | Bobcat®
This part is a genuine OEM part – not aftermarket – like our competitors are often offering.
$62.99$56.95 -
Exhaust Pipe (Turbo) [7107449] w/ Gasket | Bobcat®
Sale!$44.99$39.95 Add to cartExhaust Pipe (Turbo) [7107449] w/ Gasket | Bobcat®
Exhaust Pipe (Turbo) [7107449] w/ Gasket | Bobcat®
This is a genuine OEM part – not aftermarket – like our competitors are often offering.
$44.99$39.95 -
Hydraulic Cylinder [6810611] | Bobcat® Power Bob-Tach™
Sale!$419.99$399.95 Add to cart -
Hydraulic Cylinder [7117174] for Bucket Tilt | Bobcat®
Sale!$505.00$489.95 Add to cart -
Hydraulic Cylinder [7160395] | Bobcat® Power Bob-Tach™
$365.00 Add to cartHydraulic Cylinder [7160395] | Bobcat® Power Bob-Tach™
Hydraulic Cylinder [7160395] for Bobcat® Power Bobtach
This is an OEM Bobcat Hydraulic Cylinder which has one (1) 90° port and one (1) straight port. Please check your machine prior to ordering.
Our Hydraulic Cylinder has been completely inspected and in like-new condition.
Features:
- New Casing
- New Fittings
- New Rod
- New Seals
- New Grease Zerks
It has been completely remanufactured to original specifications.
$365.00 -
Hydraulic Cylinder [7208419] for Bucket Tilt | Bobcat®
Sale!$599.99$549.95 Add to cart -
Hydraulic Cylinders (x2) [7117174] for Bucket Tilt | Bobcat®
Sale!$999.99$929.95 Add to cart
Showing 1–40 of 100 results