River Valley Machine relies on Flat-Rate Shipping for the majority of our top-quality parts & accessories. RVM is no longer...
Read More
RVM® UNIVERSAL Quick-Attach Kits
Showing 1–16 of 28 results
-
RVM® HD Quick-Attach Kits (10)
-
Adapter Plates (14)
-
Mounting Plates (19)
-
RVM® Quick-Attach Kits (25)
-
![Handle Stud [6702958] @ RVM, LLC | River Valley Machine](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6702958-324x324.png)
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [9829913] (Weld-On) for Loader Arm Boom | John Deere® / New Holland®
$75.95 Add to cartBushing [9829913] (Weld-On) for Loader Arm Boom | John Deere® / New Holland®
Bushing (Weld-On) [9829913] for Loader Arm Boom | John Deere® / New Holland®
COMPATIBLE w/ JOHN DEERE PART #: MG9829913
REPLACEMENT FOR PART #’s: 80299130 | 89829913Skid-Steer Loader’s Arm Boom Bushings wear out over time, causing a lot of play in your Quick-Attach. Replacing your bushings with RVM’s can help make your New Holland® operate like new.
This bushing is welded onto the end of your boom and supports Quick-Attach Assembly or Mounting Plate.
$75.95 -
Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
$25.95 Add to cartQuick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
RVM® Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
Right Handle [6702904-RH]
Available w/ Kit:
$25.95 -
Quick-Attach Handle (Right) [86591460-RH] for Mounting Plate | Case® / John Deere® / New Holland®
$44.95 Add to cartQuick-Attach Handle (Right) [86591460-RH] for Mounting Plate | Case® / John Deere® / New Holland®
Quick-Attach Handle (Right) [86591460-RH] for Mounting Plate | Case® / John Deere® / New Holland®
These handles wear out and even break over time, causing a lot of play in your Quick Attach. Replacing these handles will help make your Case® / John Deere® / New Holland® operate like new.
Manufactured of cast steel.
$44.95 -
RVM® Handle Kit [RH] | Bobcat® Bob-Tach
$69.99 Add to cartRVM® Handle Kit [RH] | Bobcat® Bob-Tach
Bobcat® Bob-Tach Handle Kit [RH]
River Valley Machine, LLC offers both Right and Left Handle Repair Kits
$69.99 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter [6718752-HD] 863 864 T200 A220 Bobcat® Bob-Tach
$1,519.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter [6718752-HD] 863 864 T200 A220 Bobcat® Bob-Tach
River Valley Machine *HEAVY-DUTY* Quick-Attach Adapter Plate [6718752-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6718752
Stock Photo of Bobcat 853, except this adapter mounts to the outside of Boom Arm the same as OEM.
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,519.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6562394-HD] | Bobcat® Bob-Tach 843
$1,519.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6562394-HD] | Bobcat® Bob-Tach 843
River Valley Machine *HEAVY-DUTY* Quick-Attach Adapter Plate [6562394-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6562394 40 Series Style
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include 50 Series Style Bob-Tach used on current Machines, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,519.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853
$1,599.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853
River Valley Machine HD Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6577986
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,599.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6709215
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
IMPORTANT NOTE: This adapter is set-up for use with either 1.5″ OD or 1.25″ OD Pivot pins. Please contact Pivot Pin Size prior to ordering Contact RVM, LLC.
$1,499.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6729029-HD] Bobcat® Bob-Tach A220 | A300 | S220 | S250 | S300 | S330 | T250 | T300 | T320
$1,479.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6729029-HD] Bobcat® Bob-Tach A220 | A300 | S220 | S250 | S300 | S330 | T250 | T300 | T320
River Valley Machine HEAVY-DUTY Quick-Attach Adapter Plate [6729029-HD] | Bobcat® Bob-Tach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and bending with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,479.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bob-Tach S850 | T870
$1,549.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bob-Tach S850 | T870
RVM *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bob-Tach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
RVM Upgrade Kit Replaces Bobcat® Part #: 7128005
Ready to bolt on and use!
Our Bob-Tach will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,549.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128962-HD] Bobcat® Bob-Tach S630 | T630 | S650 | T650 | S740 | T740 | S750 | T750 | S770 | T770 | A770
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128962-HD] Bobcat® Bob-Tach S630 | T630 | S650 | T650 | S740 | T740 | S750 | T750 | S770 | T770 | A770
RVM *HEAVY-DUTY* Quick-Attach Adapter Plate [7128962-HD] | Bobcat® Bob-Tach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and bending with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
RVM Upgrade Kit Replaces Bobcat® Part #: 7128962
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,499.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7148033-HD] | Bobcat® Bob-Tach S510 S530 S550 S570 S590 S595 T550 T590 S595
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7148033-HD] | Bobcat® Bob-Tach S510 S530 S550 S570 S590 S595 T550 T590 S595
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [7148033-HD] | Bobcat® Bob-Tach
RVM HD Kit Replaces / Upgrades OEM Bobcat® Part #: 7148033
COMPATIBLE w/ Bobcat Part #’s: 7276373Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 3/8″ reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T870. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,499.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Plate [7143508-HD] | Bobcat® Bob-Tach T190
$1,379.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Plate [7143508-HD] | Bobcat® Bob-Tach T190
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [7143508] | Bobcat® Bob-Tach
Compatible w/ Bobcat® Part #’s: 7143508 | 6732537 | 6717284
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder. Setup for use w/ Power Bob-Tach.
$1,379.95 -
RVM® Pallet Fork w/ Walk-Thru
$850.00 Call RVM to OrderRVM® Pallet Fork w/ Walk-Thru
River Valley Machine Pallet Fork w/ Walk-Thru for Skid-Steer Loader
- 48″ Tines
- Fully Adjustable
- Rated for 4,500 lbs
$850.00 -
RVM® Quick-Attach Adapter Plate (3/8″) [SOLID]
$175.00 Add to cartRVM® Quick-Attach Adapter Plate (3/8″) [SOLID]
RVM® Quick Attach Adapter Plate (3/8″) SOLID
River Valley Machine also offers 5/16″ solid quick attach adapter plate…
$175.00
Showing 1–16 of 28 results