Bobcat® T450
Showing 1–16 of 18 results
-
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
$18.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$18.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Pivot Pin (Tapered) [6734661] for Loader Arms | Bobcat® Bob-Tach
$25.95 Add to cartPivot Pin (Tapered) [6734661] for Loader Arms | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6734661] for Loader Arms | Bobcat® Bob-Tach
This Pivot Pin is used between the Loader Arms and your Bobcat Bob-Tach… These pins simply wear out over time causing a lot of play in your Bob-Tach. Replacing these pins will help make your Bobcat operate like new.
$25.95 -
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
$21.95 Add to cartPivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
This pivot pin is used on the Loader Arms and Lift Cylinders.
Pivot pins wear out over time causing a lot of play in your machine. Replacing these pins will help make your Bobcat operate like new.
$21.95 -
Pivot Pin 6718789 6547595 for Lift / Loader Arm & Lift Cylinder | Bobcat®
$24.95 Add to cartPivot Pin 6718789 6547595 for Lift / Loader Arm & Lift Cylinder | Bobcat®
Pivot Pin [6718789] for Lift / Loader Arm & Lift Cylinder | Bobcat®
This Pivot Pin is used between your Loader Arms and the Lift Cylinder. These pins simply wear out over time causing a lot of play with your Loader Arms. Replacing these pins can help make your Bobcat operate like new.
$24.95 -
Pivot Wedge [6704240] | Bobcat® Bob-Tach
$24.95 Add to cartPivot Wedge [6704240] | Bobcat® Bob-Tach
Pivot Wedge [6704240] | Bobcat® Bob-Tach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bob-Tach’s not using Power Bob-Tach Cylinder.
$24.95 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
$15.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$15.95 -
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
$19.95 Add to cartPivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
The Pivot Wedge fits between your Quick-Attach Handle and Wedge.
$19.95 -
Quick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach
$25.95 Add to cartQuick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach
Quick-Attach Handle (Left) [6702903-LH] for Bobcat® Bob-Tach
This is the left-side handle (while you’re sitting inside your machine).
$25.95 -
Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
$25.95 Add to cartQuick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
RVM® Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
Right Handle [6702904-RH]
Available w/ Kit:
$25.95 -
RVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
$69.99 Add to cartRVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
RVM Quick-Attach Handle Rebuild Kit [RH-Complete] (12 Pieces) | Bobcat® Bob-Tach
Parts Included w/ Kit:
- Quick-Attach Handle (Right) [6702904-RH]
- Handle Spring [6713040]
- Washer [619021]
- Lock Nut [85D6]
- Bolt [17C660]
- Handle Stud (Weld-On) [6702958]
- Shoulder Bolt [6728473]
- Pivot Wedge [6731119]
- Compression Spring [6578253]
- Pivot Wedge [6704248]
- Spring Pin [14J5032]
- Wedge
Parts Also Available Individually:
$69.99 -
RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bob-Tach
Sale! $2.19 – $25.95 Add to cartRVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bob-Tach
RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) for Bobcat® Bob-Tach
Available As Complete Kit:
$2.19 – $25.95 -
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bob-Tach
Sale! Original price was: $12.99.$10.95Current price is: $10.95. Add to cartShoulder Bolt – 2.25″ [6728473] | Bobcat® Bob-Tach
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bob-Tach
This Shoulder Bolt is used in a variety of applications…
Features:
Pre-applied thread locker
Original price was: $12.99.$10.95Current price is: $10.95.
Showing 1–16 of 18 results