River Valley Machine is pleased to announce we are developing a downloadable catalog of our 200+ products!
Read More
RVM Parts Catalog
River Valley Machine, LLC offers a variety of genuine OEM parts and top-quality aftermarket accessories & replacement parts.
Showing 1–40 of 229 results
-
Access Cover Plates (3)
-
Bolts (8)
-
Bolt Guides (2)
-
Bucket Systems (17)
-
Bushings (40)
-
Couplers (4)
-
Door Safety (2)
-
Electrical Systems (1)
-
Exhaust Systems (3)
-
Fuel Systems (2)
-
Handle Systems (21)
-
Hydraulic Systems (50)
-
Lift / Loader Arm Parts (14)
-
Motors (4)
-
Nuts & Bolts (9)
-
Pins (51)
-
Pulleys (1)
-
Pumps (7)
-
Reducers (1)
-
Rings (4)
-
Seals (5)
-
Springs (6)
-
Washers (4)
-
Water Pumps (7)
-
Wedge Systems (15)
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$21.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$21.95 -
Access Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Add to cartAccess Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Access Cover Clean-Out Plates [6716010] for Bobcat®
DISCONTINUED PRODUCT | RVM Replacement: 7240780
-
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Bearing [7025750] (Spherical) for Hydraulic Cylinder – 45/75mm | Liebherr®
Sale!$124.99$109.95 Add to cartBearing [7025750] (Spherical) for Hydraulic Cylinder – 45/75mm | Liebherr®
Bearing [7025750] (Spherical) for Hydraulic Cylinder | Liebherr®
Our aftermarket spherical bearings for replacement in hydraulic cylinders are quite heavy-duty!
$124.99$109.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
Sale!$3.99$2.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$3.99$2.95 -
Bolt [17C884] for Wedge Pin / Upper Tilt Cylinder | Bobcat® Bobtach
Sale!$4.99$3.95 Add to cartBolt [17C884] for Wedge Pin / Upper Tilt Cylinder | Bobcat® Bobtach
Bolt [17C884] for Wedge Pin / Upper Tilt Cylinder | Bobcat® Bobtach
$4.99$3.95 -
Bolt [35C610] for Quick-Attach Handle | Bobcat® Bobtach
Sale!$4.99$3.95 Add to cartBolt [35C610] for Quick-Attach Handle | Bobcat® Bobtach
Bolt [35C610] for Quick-Attach Handle | Bobcat® Bobtach
Bolt designed to secure your Quick-Attach components.
$4.99$3.95 -
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
Sale!$4.99$3.95 Add to cartBolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
Bolt [38C810] for Quick-Attach Handle / Wedge Repair | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT PART #: 661846B
$4.99$3.95 -
Bolt [47C1088] for Lower Bobtach | Bobcat®
Sale!$4.99$3.95 Add to cartBolt [47C1088] for Lower Bobtach | Bobcat®
Bolt [47C1088] for Lower Bobtach | Bobcat®
Lower Bobtach Bolt : 5/8
$4.99$3.95 -
Bolt Guide [6562019] | Bobcat® Bobtach
Sale!$11.99$9.95 Add to cart -
![Bolt Guide [86610166] @ RVM, LLC | River Valley Machine](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/86610166.png)
Bolt Guide [86610166] | Case® / Farmall® / Fiat® / Ford® / New Holland®
Sale!$18.99$17.95 Add to cartBolt Guide [86610166] | Case® / Farmall® / Fiat® / Ford® / New Holland®
Bolt Guide [86610166] | Case® / Farmall® / Fiat® / Ford® / New Holland®
REPLACEMENT FOR PART #’s: 394233A1 | 86510868 | 86552285 | 86984419 | 86601599
$18.99$17.95 -
Bucket Shank / Bucket Tooth [6737322Y] w/ Bolts & Nuts
Sale!$21.99$18.95 Add to cartBucket Shank / Bucket Tooth [6737322Y] w/ Bolts & Nuts
Bucket Shank / Bucket Tooth [6737322Y] w/ Nuts & Bolts
REPLACEMENT FOR BOBCAT PART #: 6737322Y
Bolt-on single shank for easy installation and removal.
$21.99$18.95 -
Bucket Shank / Bucket Tooth [6737324] w/ Bolts
Sale!$21.99$18.95 Add to cartBucket Shank / Bucket Tooth [6737324] w/ Bolts
Bucket Shank / Bucket Tooth [6737324] w/ Bolts
REPLACEMENT FOR BOBCAT PART #: 6684448
Bolt-on single shank for easy installation and removal.
Bobcat style flush mount, 2 bolt adapter with a 3/4″ lip thickness for a skid steer; distance between bolt holes is 3″ center to center- Bolts onto the predrilled holes of the bucket edge.
- Provides support to firmly attach the tooth to the bucket
- 8.5 inches long
- Bolt hole center to center: 3 inches
- Reuse existing nuts and bolts
$21.99$18.95 -
Bucket Teeth [1U3302] w/ Pins & Locks | Caterpillar® Cat
$75.99 Add to cartBucket Teeth [1U3302] w/ Pins & Locks | Caterpillar® Cat
Caterpillar® Cat 1U3302 Bucket Teeth w/ Pins & Locks
$75.99 -
Bushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
Sale!$89.99$85.95 Add to cartBushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) [6559838-HD] for Loader Arm Boom | Bobcat®
This bushing is welded onto your loader arm Tapered Pivot Pin locations.
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
Our HD Bushing is designed as a significant upgrade to OEM version.
$89.99$85.95 -
Bushing [6562067] (Press-In/Weld-On) for Bobcat® Bobtach
Sale!$22.99$20.95 Add to cartBushing [6562067] (Press-In/Weld-On) for Bobcat® Bobtach
Bushing (Press-In/Weld-On) [6562067] for Bobcat® Bobtach
This bushing is press-fit into your Bobcat® Bobtach. In certain cases of excessive wear, these bushings can be welded in as well.
Bushings wear out over time causing a lot of play in your Bobtach. Replacing these bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$22.99$20.95 -
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
Sale!$32.99$29.95 Add to cartBushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bobtach
This Bushing secures the Pivot Pin between your Single-Tilt Cylinder and the Bobcat Bobtach® / Quick-Attachment…
These bushings wear out over time causing a lot of play. Replacing these bushings will help make your Bobcat like new.Note: Price is for one (1) bushing; Two (2) bushings required per machine…
$32.99$29.95 -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bobtach
Sale!$18.99$14.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bobtach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bobtach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bobtach. These wear out over time causing a lot of play in your Bobtach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$18.99$14.95 -
![Handle Stud [6702958] @ RVM, LLC | River Valley Machine](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6702958.png)
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale!$13.99$11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$13.99$11.95 -
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
Sale!$21.99$18.95 Add to cartBushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
This bushing is press-fit into the rear of your loader arms. In certain cases of excessive wear these can be welded in as well.
These bushings simply wear out over time causing a lot of play in your Bobcat®. Replacing these Bushings, when required, will help keep your machine operating like new.
$21.99$18.95 -
Bushing [6708517] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Sale!$22.99$21.95 Add to cartBushing [6708517] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Bushing (Weld-On) [6708517] for Loader Lift Arm Boom | Bobcat® Bobtach
This bushing is fit into the front lower end of your Loader Arms. These bushings wear out over time, causing a lot of play in your Bobcat. When required, replacing these bushings will keep your machine operating like new.
$22.99$21.95 -
Bushing [6711404] (Weld-On) for Bobcat® Bobtach
Sale!$59.99$54.95 Add to cartBushing [6711404] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6711404] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bobtach®.
$59.99$54.95 -
Bushing [6713156] (Weld-On) for Bobcat® Bobtach
Sale!$79.99$75.95 Add to cartBushing [6713156] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6713156] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing a lot of play in your attachment.
Replacing the bushings, when necessary, can help keep your machine operating like new and is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$79.99$75.95 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
Sale!$42.99$36.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$42.99$36.95 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Sale!$24.99$22.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bobtach. The bushings eventually wear out causing a lot of play in your Bobtach. Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$24.99$22.95 -
Bushing [6717260] (Weld-On) for Bobcat® Bobtach
Sale!$32.99$29.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bobtach
Bushing [6717260] (Weld-On) for Bobcat® Bobtach
This bushing is welded into your Bobtach. These wear out over time causing a lot of play in your Bobtach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bobtach.
When replacing your old bushings in your Bobtach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$32.99$29.95 -
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Sale!$54.99$52.95 Add to cartBushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
This bushing is welded into your Loader Arm’s tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly.
$54.99$52.95 -
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
Sale!$24.99$22.95 Add to cartBushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
This bushing is press-fit into your Bobcat® Bobtach. Bushings simply wear out over causing a lot of play in your Bobtach.
Replacing bushings is a whole lot cheaper than buying a new Bobtach, and will help keep your machine operating like new.
$24.99$22.95 -
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Sale!$99.99$92.95 Add to cartBushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$99.99$92.95 -
Bushing [6729353] (Weld-On) | Bobcat® Bobtach
Sale!$109.99$104.95 Add to cartBushing [6729353] (Weld-On) | Bobcat® Bobtach
Bushing (Weld-On) [6729353] | Bobcat® Bobtach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bobtach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$109.99$104.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bobtach
Sale!$18.99$14.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bobtach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bobtach
This Bushing is press-fit into your Bobtach. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$18.99$14.95 -
Bushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Sale!$32.99$29.95 Add to cartBushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Bushing / Reducer (Tapered) [6731254] for Loader Arm | Bobcat® Bobtach
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$32.99$29.95 -
Bushing [6731979] (Weld-On) for Bobcat® Bobtach
Sale!$69.99$65.95 Add to cartBushing [6731979] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [6731979] | Bobcat® Bobtach
This bushing is welded onto your Bobtach. Bushings wear out over time causing a lot of play in your Bobtach.
Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$69.99$65.95 -
Bushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
Sale!$44.99$42.95 Add to cartBushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
Bushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
This bushing is press-fit into your 50 Series Bobcat Bobtach. These wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
In certain cases of excessive wear, these repair bushings can be welded in as well.
$44.99$42.95 -
Bushing [6802752] (Press-In/Weld-On) for Tilt Cylinder | Bobcat®
Sale!$18.99$16.95 Add to cartBushing [6802752] (Press-In/Weld-On) for Tilt Cylinder | Bobcat®
Bushing (Press-In / Weld-On) for Tilt Cylinder [6802752] | Bobcat®
This bushing is press-fit into the Tilt Cylinder Rod Ends. These bushings wear out over time causing a lot of play in your Bobtach. Replacing these bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings. In certain cases of excessive wear these can be welded in as well.
$18.99$16.95 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
Sale!$24.99$22.95 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$24.99$22.95 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Sale!$12.99$10.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$12.99$10.95 -
Bushing [7000004] for Rotary Union | Liebherr®
Sale!$44.99$39.95 Add to cartBushing [7000004] for Rotary Union | Liebherr®
Bushing [7000004] for Rotary Union | Liebherr®
RVM offers an aftermarket PTFE-lined steel bushings used in Liebherr rotary union replacement / rebuild.
$44.99$39.95 -
Bushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Sale!$62.99$58.95 Add to cartBushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7136465] | Bobcat® Bob-Tach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$62.99$58.95 -
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Sale!$22.99$20.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$22.99$20.95
Showing 1–40 of 229 results
