Bobcat® S850
The Bobcat® S850 is manufactured by Bobcat® since 2010 with additional / newer models released in 2012 and 2016.
The Bobcat® S850 regains the “world’s largest” title with a rated capacity of 3,950 lb., lift height of 12 feet, and 92 hp diesel engine.
Showing all 22 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$21.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$21.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale!$13.99$11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$13.99$11.95 -
Bushing [7140168] (Weld-On) for Bobcat® Bobtach
Sale!$59.99$56.95 Add to cartBushing [7140168] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [7140168] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$59.99$56.95 -
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Sale!$34.99$32.95 Add to cartBushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
This Bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and can help keep your machine operating like new.
$34.99$32.95 -
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Sale!$109.99$102.95 Add to cartBushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 7170610
This bushing is welded into your Bobcat® Bobtach. Bushings simply wear out over causing a lot of play in your Bobtach… Replacing these bushings is a whole lot cheaper than buying a new Loader Arm Assembly, and will help keep your machine operating like new.
Our Weld-On Bushing includes Bushing (Press-In) [7170615]
$109.99$102.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Sale!$10.99$8.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bobtach operate like new again.
$10.99$8.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Sale!$3.95$1.95 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$3.95$1.95 -
Pivot Pin [7140392] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Sale!$34.99$32.95 Add to cartPivot Pin [7140392] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Pivot Pin [7140392] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Loader’s Lift Arms & Tilt Cylinder.
Pivot Pins simply wear out over time causing various issues with your attachment. Replacing your Pivot Pins can help make your Bobcat operate like new again.
$34.99$32.95 -
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
$47.50 Add to cartPivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pins commonly wear out – or even break – causing a lot of issues with your Quick-Attach. Replacing these assemblies can help make your Skid-Steer Loader operate like new.
$47.50 -
Pivot Wedge [6704240] | Bobcat® Bobtach
Sale!$24.99$21.95 Add to cartPivot Wedge [6704240] | Bobcat® Bobtach
Pivot Wedge [6704240] | Bobcat® Bobtach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bobtach’s not using Power Bobtach Cylinder.
$24.99$21.95 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Sale!$14.99$12.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$14.99$12.95 -
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bobtach
Sale!$19.99$15.95 Add to cartPivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bobtach
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bobtach
The Pivot Wedge fits between your Quick-Attach Handle and Wedge.
$19.99$15.95 -
Quick-Attach Handle (Left) [6702903] | Bobcat® Bobtach
Sale!$24.99$21.95 Add to cartQuick-Attach Handle (Left) [6702903] | Bobcat® Bobtach
Quick-Attach Handle (Left) [6702903-LH] for Bobcat® Bobtach
This is the left-side handle (while you’re sitting inside your machine).
$24.99$21.95 -
Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
Sale!$24.99$21.95 Add to cartQuick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
RVM® Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bobtach
Right Handle [6702904-RH]
Available w/ Kit:
$24.99$21.95 -
Roll Pin / Spring Pin [7277777] | Bobcat® Bobtach
Sale!$4.99$3.99 Add to cartRoll Pin / Spring Pin [7277777] | Bobcat® Bobtach
Roll Pin / Spring Pin [7277777] | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 14J5032
$4.99$3.99 -
RVM® *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bobtach
Sale!$1,319.99$1,299.95 Call RVM to OrderRVM® *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bobtach
RVM *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bobtach
RVM Upgrade Kit Replaces Bobcat® Part #: 7128005
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bobtach cylinder.
$1,319.99$1,299.95 -
RVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
Sale!$59.99$52.99 Add to cartRVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
RVM Quick-Attach Handle Rebuild Kit [RH-Complete] (12 Pieces) | Bobcat® Bobtach
Parts Included w/ Kit:
- Quick-Attach Handle (Right) [6702904-RH]
- Handle Spring [6713040]
- Washer [619021]
- Lock Nut [85D6]
- Bolt [17C660]
- Handle Stud (Weld-On) [6702958]
- Shoulder Bolt [6728473]
- Pivot Wedge [6731119]
- Compression Spring [6578253]
- Pivot Wedge [6704248]
- Spring Pin [14J5032]
- Wedge
Parts Also Available Individually:
$59.99$52.99 -
RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bobtach
Sale! $1.19 – $21.95 Add to cartRVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bobtach
RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) for Bobcat® Bobtach
Available As Complete Kit:
$1.19 – $21.95 -
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
Sale!$12.99$10.95 Add to cartShoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
This Shoulder Bolt is used in a variety of applications…
Features:
Pre-applied thread locker
$12.99$10.95 -
Spring [7221255] for Quick-Attach Handle | Bobcat® Bobtach
Sale!$10.99$8.95 Add to cartSpring [7221255] for Quick-Attach Handle | Bobcat® Bobtach
Spring [7221255] for Quick-Attach Handle | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT PART #: 17C644
Handle Springs keep your Quick-Attach Handles in the ‘up’ position and keeps the handles securely tight.
Replacing your Handle Springs can help make your Bobtach operate like new again.
$10.99$8.95 -
Washer [619021] | Bobcat®
Sale!$1.99$1.19 Add to cartWasher [619021] | Bobcat®
Washer [619021] | Bobcat
REPLACEMENT FOR BOBCAT PART #: 619021B
This flat washer is used in several applications & locations:
Bobtach Levers
Quick-Attach Handles
Hydraulic Systems$1.99$1.19 -
Wedge Pin [6737191] | Bobcat® Bobtach
Sale!$20.99$15.95 Add to cartWedge Pin [6737191] | Bobcat® Bobtach
Wedge Pin [6737191] | Bobcat® Bobtach / Fast-Tach
This Wedge Pin attaches to the Quick-Attach Handles on your Bobcat® Bobtach. The Wedge holds the Quick-Attach to your bucket or other attachment.
Wedges simply get rusty and worn out over time. Replacing your Wedges can help your Bobtach operate like new again.
$20.99$15.95
Showing all 22 results