River Valley Machine relies on Flat-Rate Shipping for the majority of our top-quality parts & accessories. RVM is no longer...
Read More
RVM
Showing 1–16 of 26 results
-
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
$22.49 Add to cartBushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
This bushing is press-fit into the rear of your loader arms. In certain cases of excessive wear these can be welded in as well.
These bushings simply wear out over time causing a lot of play in your Bobcat®. Replacing these Bushings, when required, will help keep your machine operating like new.
$22.49 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
$35.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$35.95 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
$19.49 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$19.49 -
Bushing [7160425] RVM® HD Bushing (Tapered / Weld-On) 2 5/8 OD for Lift / Loader Arm Boom | Bobcat® Bob-Tach
$39.95 Add to cartBushing [7160425] RVM® HD Bushing (Tapered / Weld-On) 2 5/8 OD for Lift / Loader Arm Boom | Bobcat® Bob-Tach
RVM® HD Bushing (Tapered / Weld-On) [7160425-HD] for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm / boom tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$39.95 -
Bushings 86601599-2 (Weld-On) for Quick-Attach Pin (4 Pieces) | New Holland® For use with 9614349 Pins
Sale! Original price was: $34.99.$32.95Current price is: $32.95. Add to cartBushings 86601599-2 (Weld-On) for Quick-Attach Pin (4 Pieces) | New Holland® For use with 9614349 Pins
Bushings (Weld-On) for Quick-Attach Pin (4 Pieces) [86601599] | New Holland® / Case®
These bushings are used between the Loader Arms and Quick-Attach Assembly. Simply cut out the old bushings and weld-in the new ones.
Quantity four (4) of Weld-On Bushings for Lower-Bucket Cylinder Pivot Pin | Case® / New Holland® –
Original price was: $34.99.$32.95Current price is: $32.95. -
Pivot Pin (Tapered) [47489943] for Upper Tilt Cylinder w/ Washer | Case® / New Holland®
$42.95 Add to cartPivot Pin (Tapered) [47489943] for Upper Tilt Cylinder w/ Washer | Case® / New Holland®
Pivot Pin (Tapered) [47489943] for Upper Tilt Cylinder | Case® / New Holland®
This Pivot Pin is used between your Loader Arms and the Upper Tilt Cylinder.
Pivot Pins wear out – or even break – causing a lot of problems with your Quick-Attach. Replacing your Pivot Pins can help make your Case® / New Holland® operate like new.
$42.95 -
Pivot Pin (Tapered) 51500620 for Loader Arms & Quick-Attach / Mounting Plate | Case® / New Holland®
$38.95 Add to cartPivot Pin (Tapered) 51500620 for Loader Arms & Quick-Attach / Mounting Plate | Case® / New Holland®
Pivot Pin (Tapered) [51500620] for Loader Arms & Quick-Attach / Mounting Plate | Case® / New Holland®
REPLACEMENT for Case New Holland #: 51500620
COMPATIBLE PART #/s: 84201514, 47396814 , 47777374, 47777374, 47899093, 47955818, 84603239This Pivot Pin is used between the Loader Arms and your Quick-Attach Assembly or Mounting Plate. The pins simply wear out over time causing a lot of play in your Quick-Attach. Replacing these pins can help make your Case® / New Holland® operate like new.
$38.95 -
RVM® Handle Stud Repair / Rebuild Kit | Bobcat® Bob-Tach
$5.15 – $18.95 Add to cartRVM® Handle Stud Repair / Rebuild Kit | Bobcat® Bob-Tach
RVM Handle Stud Repair / Rebuild Kit | Bobcat® Bob-Tach
The Handle Stud supports the handle and handle spring.
The handle studs wear out over time and replacing them will help keep the handles tight and help keep your Bob-Tach operating like new.
Available As Complete Kit.
$5.15 – $18.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853
$1,599.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853
River Valley Machine HD Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6577986
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,599.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6709215
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
IMPORTANT NOTE: This adapter is set-up for use with either 1.5″ OD or 1.25″ OD Pivot pins. Please contact Pivot Pin Size prior to ordering Contact RVM, LLC.
$1,499.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6729029-HD] Bobcat® Bob-Tach A220 | A300 | S220 | S250 | S300 | S330 | T250 | T300 | T320
$1,479.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6729029-HD] Bobcat® Bob-Tach A220 | A300 | S220 | S250 | S300 | S330 | T250 | T300 | T320
River Valley Machine HEAVY-DUTY Quick-Attach Adapter Plate [6729029-HD] | Bobcat® Bob-Tach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and bending with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,479.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bob-Tach S850 | T870
$1,549.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bob-Tach S850 | T870
RVM *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bob-Tach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
RVM Upgrade Kit Replaces Bobcat® Part #: 7128005
Ready to bolt on and use!
Our Bob-Tach will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,549.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128962-HD] Bobcat® Bob-Tach S630 | T630 | S650 | T650 | S740 | T740 | S750 | T750 | S770 | T770 | A770
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7128962-HD] Bobcat® Bob-Tach S630 | T630 | S650 | T650 | S740 | T740 | S750 | T750 | S770 | T770 | A770
RVM *HEAVY-DUTY* Quick-Attach Adapter Plate [7128962-HD] | Bobcat® Bob-Tach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and bending with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
RVM Upgrade Kit Replaces Bobcat® Part #: 7128962
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,499.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7148033-HD] | Bobcat® Bob-Tach S510 S530 S550 S570 S590 S595 T550 T590 S595
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [7148033-HD] | Bobcat® Bob-Tach S510 S530 S550 S570 S590 S595 T550 T590 S595
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [7148033-HD] | Bobcat® Bob-Tach
RVM HD Kit Replaces / Upgrades OEM Bobcat® Part #: 7148033
COMPATIBLE w/ Bobcat Part #’s: 7276373Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 3/8″ reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T870. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,499.95 -
RVM® Lift / Loader Arm Repair Kit | Bobcat® Bob-Tach
Sale! $9.95 – $39.95 Add to cartRVM® Lift / Loader Arm Repair Kit | Bobcat® Bob-Tach
River Valley Machine Lift / Loader Arm Repair Kit | Bobcat® Bob-Tach
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
River Valley Machine’s Loader Arm Boom Repair Kit for Bobcat Bob-Tach is very heavy duty.
To install, you must cut off the end of your Loader Arm and weld busing in place.Available Parts:
- Bushing (Weld-On) *HEAVY-DUTY* for Boom Lift Arm [7160425]
- Pivot Pin [7101078]
- Bolt [47C1088]
- Washer [27E10]
$9.95 – $39.95 -
RVM® Pallet Fork w/ Walk-Thru
$850.00 Call RVM to OrderRVM® Pallet Fork w/ Walk-Thru
River Valley Machine Pallet Fork w/ Walk-Thru for Skid-Steer Loader
- 48″ Tines
- Fully Adjustable
- Rated for 4,500 lbs
$850.00
Showing 1–16 of 26 results