Bobcat® T870
The Bobcat® T870 was released in 2010…
Showing 1–16 of 20 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Access Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Access Cover Clean-Out Plates [6716010] for Bobcat®
DISCONTINUED PRODUCT | RVM Replacement: 7240780
$22.95 -
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$21.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$21.95 -
Bushing [7140168] (Weld-On) for Bobcat® Bobtach
$54.95 Add to cartBushing [7140168] (Weld-On) for Bobcat® Bobtach
Bushing (Weld-On) [7140168] | Bobcat® Bobtach
This bushing is welded into your Bobtach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bobtach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95 -
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Sale! $32.95 Add to cartBushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
This Bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and can help keep your machine operating like new.
$32.95 -
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Sale! $102.95 Add to cartBushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 7170610
This bushing is welded into your Bobcat® Bobtach. Bushings simply wear out over causing a lot of play in your Bobtach… Replacing these bushings is a whole lot cheaper than buying a new Loader Arm Assembly, and will help keep your machine operating like new.
Our Weld-On Bushing includes Bushing (Press-In) [7170615]
$102.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Sale! $1.95 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$1.95 -
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
$47.50 Add to cartPivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pins commonly wear out – or even break – causing a lot of issues with your Quick-Attach. Replacing these assemblies can help make your Skid-Steer Loader operate like new.
$47.50 -
Pivot Wedge [6704240] | Bobcat® Bobtach
Sale! $21.95 Add to cartPivot Wedge [6704240] | Bobcat® Bobtach
Pivot Wedge [6704240] | Bobcat® Bobtach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bobtach’s not using Power Bobtach Cylinder.
$21.95 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Sale! $12.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$12.95 -
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bobtach
Sale! $15.95 Add to cartPivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bobtach
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bobtach
The Pivot Wedge fits between your Quick-Attach Handle and Wedge.
$15.95 -
Quick-Attach Handle (Left) [6702903] | Bobcat® Bobtach
Sale! $21.95 Add to cartQuick-Attach Handle (Left) [6702903] | Bobcat® Bobtach
Quick-Attach Handle (Left) [6702903-LH] for Bobcat® Bobtach
This is the left-side handle (while you’re sitting inside your machine).
$21.95 -
Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
Sale! $21.95 Add to cartQuick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
RVM® Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bobtach
Right Handle [6702904-RH]
Available w/ Kit:
$21.95 -
Roll Pin / Spring Pin [7277777] | Bobcat® Bobtach
Sale! $3.99 Add to cartRoll Pin / Spring Pin [7277777] | Bobcat® Bobtach
Roll Pin / Spring Pin [7277777] | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 14J5032
$3.99 -
RVM® HD [HEAVY-DUTY] Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bobtach S850 T870
Sale! $1,499.99 Call RVM to OrderRVM® HD [HEAVY-DUTY] Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bobtach S850 T870
RVM *HEAVY-DUTY* Quick-Attach Adapter Plate [7128005-HD] | Bobcat® Bobtach
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, increased steel strength, reinforced top ears, hardened bushings, increased torque tube wall thickness to eliminate twisting and powder coat finish. Gauranteed to outlast an OEM Bobtach with a much better price.
RVM Upgrade Kit Replaces Bobcat® Part #: 7128005
Ready to bolt on and use!
Our Bobtach will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bobtach cylinder.
$1,499.99 -
RVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
$59.99 Add to cartRVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
RVM Quick-Attach Handle Rebuild Kit [RH-Complete] (12 Pieces) | Bobcat® Bobtach
Parts Included w/ Kit:
- Quick-Attach Handle (Right) [6702904-RH]
- Handle Spring [6713040]
- Washer [619021]
- Lock Nut [85D6]
- Bolt [17C660]
- Handle Stud (Weld-On) [6702958]
- Shoulder Bolt [6728473]
- Pivot Wedge [6731119]
- Compression Spring [6578253]
- Pivot Wedge [6704248]
- Spring Pin [14J5032]
- Wedge
Parts Also Available Individually:
$59.99
Showing 1–16 of 20 results