River Valley Machine relies on Flat-Rate Shipping for the majority of our top-quality parts & accessories. RVM is no longer...
Read More
Bobcat® G Series
G-Series cab is the result of a serious internal focus on operator comfort. Loaders equipped with the new cab offer factory-installed air conditioning, more elbow room, a more comfortable seat and improved instrumentation. The hydraulic Power Bob-Tach system also debuts with the G-Series, giving operators the ability to change attachments with the push of a button.
Showing 1–16 of 20 results
-
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$21.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$21.95 -
Bolt [47C1088] for Lower Bobtach | Bobcat®
Sale! $8.95 Add to cartBolt [47C1088] for Lower Bobtach | Bobcat®
Bolt [47C1088] for Lower Bobtach | Bobcat®
Lower Bobtach Bolt : 5/8
$8.95 -
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
$39.99 Add to cartBushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bobtach
This bushing is welded into your Loader Arm’s tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly.
$39.99 -
Bushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Sale! $29.95 Add to cartBushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bobtach
Bushing / Reducer (Tapered) [6731254] for Loader Arm | Bobcat® Bobtach
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$29.95 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
$18.94 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bobtach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$18.94 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
$17.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$17.95 -
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
$33.99 Add to cartBushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$33.99 -
Door Latch Striker (Front) [6568047] | Bobcat®
Sale! $14.95 Add to cartDoor Latch Striker (Front) [6568047] | Bobcat®
Door Latch Striker (Front) [6568047] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$14.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Sale! $1.95 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$1.95 -
Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bobtach | Bobcat®
$35.75 Add to cartPivot Pin (Tapered) [6717536] for Lift Arms & Lower Bobtach | Bobcat®
Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bobtach | Bobcat®
Our replacement Pivot Pin is used between your loader arms and the Bobtach.
Pivot Pins eventually wear out over time causing a lot of play in your Bobtach. Replacing your Pivot Pins can help make your Bobcat® operate like new.
RVM Recommendation: Please note, when changing your Pivot Pins, River Valley Machine encourages to also replace Bobcat Part # 6730997 (Press-In) Bushing.
$35.75 -
Pivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
$27.90 Add to cartPivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
Pivot Pin [6547593] for Single-Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Lift / Loader’s Arms and the Lift Cylinder. Pivot Pins simply wear out over time causing issues with your Loader’s Arms.
Replacing these pins can help make your Bobcat® operate like new again.
$27.90 -
Pivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
$32.99 Add to cartPivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
Pivot Pin [6703572] for Single-Tilt Cylinder | Bobcat®
This Pivot Pin is used between your Lift / Loader’s Arms and the Single-Tilt Cylinder. Pivot Pins simply wear out over time causing issues with your Loader’s Arms.
Replacing these pins can help make your Bobcat® operate like new again.
$32.99 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Sale! $12.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$12.95 -
RVM® Kit for Loader Lift Arm Bushings (Complete) | Bobcat® Bobtach
$48.99 Add to cartRVM® Kit for Loader Lift Arm Bushings (Complete) | Bobcat® Bobtach
River Valley Machine Repair Kit for Loader Arm Bushings (Complete) | Bobcat® Bobtach
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
River Valley Machine’s Loader Arm Boom Repair Kit for Bobcat Bobtach is very heavy duty.
To install, you must cut off the end of your Loader Arm and weld bushing in place.RVM Kit Includes:
- Bushing (Weld-On) for Lift Arm Boom [7160425-HD]
- Pivot Pin (Tapered) [7101078]
- Bolt [47C1088]
- Washer [27E10]
$48.99 -
RVM® Lift / Loader Arm Repair Kit | Bobcat® Bobtach
Sale! $8.95 – $38.99 Add to cartRVM® Lift / Loader Arm Repair Kit | Bobcat® Bobtach
River Valley Machine Lift / Loader Arm Repair Kit | Bobcat® Bobtach
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
River Valley Machine’s Loader Arm Boom Repair Kit for Bobcat Bobtach is very heavy duty.
To install, you must cut off the end of your Loader Arm and weld busing in place.Available Parts:
- Bushing (Weld-On) *HEAVY-DUTY* for Boom Lift Arm [7160425]
- Pivot Pin [7101078]
- Bolt [47C1088]
- Washer [27E10]
$8.95 – $38.99 -
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
Sale! $10.95 Add to cartShoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
This Shoulder Bolt is used in a variety of applications…
Features:
Pre-applied thread locker
$10.95
Showing 1–16 of 20 results