Bobcat® A300
The Bobcat® A300 was manufactured by Bobcat® from 2001 until 2011. Several additional models were released in 2003 & 2008.
[Replaced by Bobcat A770]
The Bobcat® A300 model is added to the AWS (All-Wheel Steer) lineup which is a larger model than their Bobcat® A220. Features joysticks for drive control and lift arm operation.
Showing 1–16 of 30 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
$4.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$4.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bob-Tach
This bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and will help keep your machine operating like new.
$25.95 -
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
$92.95 Add to cartBushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$92.95 -
Bushing [6729353] (Weld-On) | Bobcat® Bob-Tach
$92.95 Add to cartBushing [6729353] (Weld-On) | Bobcat® Bob-Tach
Bushing (Weld-On) [6729353] | Bobcat® Bob-Tach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bob-Tach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$92.95 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
$18.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$18.95 -
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
$22.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$22.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
$9.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bob-Tach
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bob-Tach operate like new again.
$9.95 -
Door Striker (Front) (Magnetic) [7109664] | Bobcat®
$18.95 Add to cartDoor Striker (Front) (Magnetic) [7109664] | Bobcat®
Front Door Striker (Magnetic) [7109664] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$18.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
$59.95 Add to cartPivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used loader’s Upper Tilt Cylinder. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing your Pivot Pins can help make your Bobcat operate like new.
$59.95 -
Pivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bob-Tach
$32.95 Add to cartPivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bob-Tach
This pin is used between your Lift / Loader Arms and the Bob-Tach. These pins wear out over time causing a lot of play in your Bob-Tach. Replacing these pins can help make your Bobcat® operate like new.
RVM Tips & Recommendations: When changing your Pivot Pin, River Valley Machine encourages you to also replace your Bushing (Press-In) [7139943]
$32.95 -
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
$21.95 Add to cartPivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
This pivot pin is used on the Loader Arms and Lift Cylinders.
Pivot pins wear out over time causing a lot of play in your machine. Replacing these pins will help make your Bobcat operate like new.
$21.95 -
Pivot Wedge [6704240] | Bobcat® Bob-Tach
$24.95 Add to cartPivot Wedge [6704240] | Bobcat® Bob-Tach
Pivot Wedge [6704240] | Bobcat® Bob-Tach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bob-Tach’s not using Power Bob-Tach Cylinder.
$24.95
Showing 1–16 of 30 results