Bobcat® M Models
The M-Series by Bobcat® was introduced in 2009 – another complete remake of their loader line.
The M-Series‘ distinctive “cab-forward” design moves the operator closer to the work, giving better visibility of the attachment and all around the loader. It offers easier entry and exit, a sealed and pressurized operator cab for a clean working environment, better lighting and the latest electronic instrumentation.
In 2012, Bobcat® introduced the 500 M-Series frame size to the line, consisting of six (6) additional models offered, with operating capacities ranging from 1650 lbs. to 2100 lbs.
Orders received up until August 1st, 2022 will be processed ASAP. We anticipate being fully operational again within a couple weeks.
We apologize for any inconvenience and look forward to helping you in the near future. Please don't hesitate to call with any questions or concerns.
(563) 845-1986
Showing all 13 results
-
Bobcat® E35 (M-Series) (1)
-
Bobcat® E35i (M-Series) (1)
-
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale! $11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$11.95 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
$17.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$17.95 -
Hydraulic Boom Cylinder 7191555 for Loader Arm Boom Bobcat® Mini-Excavator E32 E32i E35 E35i
$695.95 Add to cart -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Sale! $1.95 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$1.95 -
Pivot Pin (Tapered) [7135590] | Bobcat® Bobtach
Sale! $25.95 Add to cartPivot Pin (Tapered) [7135590] | Bobcat® Bobtach
Pivot Pin (Tapered) [7135590] for Lift / Loader Arm & Lower Bobtach | Bobcat®
This Pivot Pin is used between your Lift / Loader Arms and the Bobtach. The pin attaches the Lift Arm to the Bobtach system.
Pivot Pins eventually wear out, causing a lot of play in your Bobtach. Replacing these pins can help make your Bobcat® operate like new again.
$25.95 -
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
$47.50 Add to cartPivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pins commonly wear out – or even break – causing a lot of issues with your Quick-Attach. Replacing these assemblies can help make your Skid-Steer Loader operate like new.
$47.50 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Sale! $12.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bobtach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$12.95 -
Roll Pin / Spring Pin [7277777] | Bobcat® Bobtach
Sale! $3.99 Add to cartRoll Pin / Spring Pin [7277777] | Bobcat® Bobtach
Roll Pin / Spring Pin [7277777] | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 14J5032
$3.99 -
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
Sale! $10.95 Add to cartShoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
Shoulder Bolt – 2.25″ [6728473] | Bobcat® Bobtach
This Shoulder Bolt is used in a variety of applications…
Features:
Pre-applied thread locker
$10.95 -
Washer [619021] | Bobcat®
Sale! $1.19 Add to cartWasher [619021] | Bobcat®
Washer [619021] | Bobcat
REPLACEMENT FOR BOBCAT PART #: 619021B
This flat washer is used in several applications & locations:
Bobtach Levers
Quick-Attach Handles
Hydraulic Systems$1.19 -
Wedge Pin [6737191] | Bobcat® Bobtach
Sale! $17.95 Add to cartWedge Pin [6737191] | Bobcat® Bobtach
Wedge Pin [6737191] | Bobcat® Bobtach / Fast-Tach
This Wedge Pin attaches to the Quick-Attach Handles on your Bobcat® Bobtach. The Wedge holds the Quick-Attach to your bucket or other attachment.
Wedges simply get rusty and worn out over time. Replacing your Wedges can help your Bobtach operate like new again.
$17.95
Showing all 13 results