Description
Dimensions
1.25″ (31,8 mm) ID
1.442″ OD
2″ Length
For Use With:
1.25″ ID Pin
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
In stock (can be backordered)
$22.49
Bushing [6703448] (Press-In/Weld-On) for Rear Lift / Loader Arm | Bobcat®
This bushing is press-fit into the rear of your loader arms. In certain cases of excessive wear these can be welded in as well.
These bushings simply wear out over time causing a lot of play in your Bobcat®. Replacing these Bushings, when required, will help keep your machine operating like new.
$22.49
| Dimensions | 2 × 1.44 in |
|---|---|
| Bobcat |
Additional information
| Dimensions | 2 × 1.44 in |
|---|---|
| Bobcat |
Contact River Valley Machine
Questions, Comments?
Related products
-
RVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
$425.00 Call RVM to OrderRVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
River Valley Machine Universal Quick-Attach Adapter Assembly
RVM’s Quick-Attach System uses OEM Case® / New Holland® parts. All internal parts are replaceable at your local Case® / New Holland® Dealer.
In our experiences, the Case® / New Holland® design is one of the best on the market for retrofitting your older machine.
Why our Quick-Attach System is Better than our Competitor/s…
- Heavy-Duty Cast Steel Handles w/ OEM Parts
- Meets / exceeds OEM Standards & Quality
- Lowest cost, most versatile design on the market.
- Greaseable Pin & Bushing design
- All moveable internal parts are protected from dirt debris and damage
- Large surface area to weld on your cylinder mounts to the back of the latch box
- Thin assembly design helps keep the attachments closer to your machine for increased lift capacity
- Supports up to 2,750 lbs lift / 5,500 lbs tip weight on attachment (but only weighs 85 lbs)!
Includes w/ Kit:
Buyer will receive one Heavy Duty High-Quality Quick Attach Assembly complete with all internal parts, handles, springs, pins, bolts. This assembly will be shipped unpainted for ease of welding.
$425.00 -
RVM® Wedge Repair Kit [LH] | Bobcat® Bob-Tach
$79.99 Add to cartRVM® Wedge Repair Kit [LH] | Bobcat® Bob-Tach
Bobcat® Bob-Tach Wedge Repair Kit [LH]
River Valley Machine, LLC sells both Left and Right Wedge Repair Kits…
$79.99 -
RVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
$89.99 Add to cartRVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
River Valley Machine Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
COMPATIBLE BOBCAT® PART #’s: 7143508 | 6732537 | 6717284
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our Quick-Attach Mount Plate / Panel Repair Kit, you can replace actually replace the damaged portions of your Bob-Tach to help make it appear & operate like new again – without having to spend $1300+ buying a replacement Bob-Tach.
$89.99
