Bobcat Bobtach
Showing 1–16 of 54 results
-
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bob-Tach
Sale! Original price was: $34.95.$32.95Current price is: $32.95. Add to cartBushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bob-Tach
Bushing [6562642] for Pivot Pin w/ Zerk on Single-Tilt Cylinder | Bobcat® Bob-Tach
This Bushing secures the Pivot Pin between your Single-Tilt Cylinder and the Bobcat Bob-Tach® / Quick-Attachment…
These bushings wear out over time causing a lot of play. Replacing these bushings will help make your Bobcat like new.Note: Price is for one (1) bushing; Two (2) bushings required per machine…
Original price was: $34.95.$32.95Current price is: $32.95. -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
$19.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bob-Tach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$19.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6711404] (Weld-On) for Bobcat® Bob-Tach
$59.95 Add to cartBushing [6711404] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6711404] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bob-Tach®.
$59.95 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
$25.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$25.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95 -
Bushing [6731979] (Weld-On) for Bobcat® Bob-Tach
$64.95 Add to cartBushing [6731979] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6731979] | Bobcat® Bob-Tach
This bushing is welded onto your Bob-Tach. Bushings wear out over time causing a lot of play in your Bob-Tach.
Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$64.95 -
Bushing [7136465] (Weld-On) for Bobcat® Bob-Tach
$69.95 Add to cartBushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7136465] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach®! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$69.95 -
Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach
$54.95 Add to cartBushing [7140168] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7140168] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95 -
Bushing [7148022] (Weld-On) for Bobcat® Bob-Tach
$60.95 Add to cartBushing [7148022] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7148022] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment.
Removing your old worn-out bushings and welding in these new bushings, is a lot cheaper than buying a new Bob-Tach®, and can help make your machine operate like new.
$60.95 -
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
$9.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bob-Tach
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bob-Tach operate like new again.
$9.95 -
Handle Stud [6562013] | Bobcat®
$18.95 Add to cartHandle Stud [6562013] | Bobcat®
Handle Stud [6562013] | Bobcat®
The Handle Stud supports the Quick-Attach Handle and Handle Spring.
Handle Studs eventually wear out… Replacing them will help keep your handles tight and can help keep your Bob-Tach operating like new.
$18.95 -
Pivot Pin (Tapered) [6559018] for Loader Arms | Bobcat® Articulated Loaders
$34.95 Add to cartPivot Pin (Tapered) [6559018] for Loader Arms | Bobcat® Articulated Loaders
Pivot Pin (Tapered) [6559018] for Loader Arms | Bobcat® Bob-Tach
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing these pins will help keep your Bobcat operating like new.
$34.95 -
Pivot Pin (Tapered) [6707042] for Loader Arm | Bobcat® Bob-Tach
$29.95 Add to cart
Showing 1–16 of 54 results