Bobcat 853
Showing 1–16 of 31 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
$4.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$4.95 -
Bushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
$92.95 Add to cartBushing [6559838-HD] RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) for Loader Arm Boom | Bobcat®
RVM® HD [HEAVY-DUTY] Bushing (Tapered / Weld-On) [6559838-HD] for Loader Arm Boom | Bobcat®
This bushing is welded onto your loader arm Tapered Pivot Pin locations.
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
Our HD Bushing is designed as a significant upgrade to OEM version.
$92.95 -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
$19.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bob-Tach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$19.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
$41.95 Add to cartBushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Bushing [6717666] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your Loader Arm’s tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly.
$41.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95 -
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
$34.95 Add to cartBushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$34.95 -
Bushing [7160425] RVM® HD Bushing (Tapered / Weld-On) 2 5/8 OD for Lift / Loader Arm Boom | Bobcat® Bob-Tach
$39.95 Add to cartBushing [7160425] RVM® HD Bushing (Tapered / Weld-On) 2 5/8 OD for Lift / Loader Arm Boom | Bobcat® Bob-Tach
RVM® HD Bushing (Tapered / Weld-On) [7160425-HD] for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm / boom tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$39.95 -
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Door Latch Striker (Front) [6568047] | Bobcat®
$18.95 Add to cartDoor Latch Striker (Front) [6568047] | Bobcat®
Door Latch Striker (Front) [6568047] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$18.95 -
Door Latch Striker (Rear) [6715157] | Bobcat®
$21.95 Add to cartDoor Latch Striker (Rear) [6715157] | Bobcat®
Door Latch Striker (Rear) [6715157] | Bobcat®
Rear Door Strikers wear out over time. Replacing them will help keep your door operating like new.
$21.95 -
Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used between the Lower Tilt Cylinder and your Bobcat® Bob-Tach.
This is a solid pivot pin – the pin does not have a grease zerk hole.
$29.95 -
Pivot Pin (Tapered) [6707180] for Loader Arms | Bobcat® Bob-Tach
$34.95 Add to cartPivot Pin (Tapered) [6707180] for Loader Arms | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6707180] for Loader Arms | Bobcat® Bob-Tach
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing these pins will help make your Bobcat operate like new.
$34.95 -
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
$21.95 Add to cartPivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
This pivot pin is used on the Loader Arms and Lift Cylinders.
Pivot pins wear out over time causing a lot of play in your machine. Replacing these pins will help make your Bobcat operate like new.
$21.95
Showing 1–16 of 31 results