Bobcat A770 (All-Wheel Steer)
Showing 1–16 of 26 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Access Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Squared) [6716010] for Clean-Out | Bobcat®
Access Cover Clean-Out Plates [6716010] for Bobcat®
DISCONTINUED PRODUCT | RVM Replacement: 7240780
$24.95 -
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [7136465] (Weld-On) for Bobcat® Bob-Tach
$69.95 Add to cartBushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7136465] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach®! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$69.95 -
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
$34.95 Add to cartBushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
This Bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and can help keep your machine operating like new.
$34.95 -
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
$105.95 Add to cartBushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 7170610
This bushing is welded into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach… Replacing these bushings is a whole lot cheaper than buying a new Loader Arm Assembly, and will help keep your machine operating like new.
Our Weld-On Bushing includes Bushing (Press-In) [7170615]
$105.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
$59.95 Add to cartPivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used loader’s Upper Tilt Cylinder. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing your Pivot Pins can help make your Bobcat operate like new.
$59.95 -
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
$21.95 Add to cartPivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
Pivot Pin [6577954] for Lift / Loader Arm & Tilt Cylinder | Bobcat®
This pivot pin is used on the Loader Arms and Lift Cylinders.
Pivot pins wear out over time causing a lot of play in your machine. Replacing these pins will help make your Bobcat operate like new.
$21.95 -
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
$49.95 Add to cartPivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®
Pivot Pins commonly wear out – or even break – causing a lot of issues with your Quick-Attach. Replacing these assemblies can help make your Skid-Steer Loader operate like new.
$49.95 -
Pivot Wedge [6704240] | Bobcat® Bob-Tach
$24.95 Add to cartPivot Wedge [6704240] | Bobcat® Bob-Tach
Pivot Wedge [6704240] | Bobcat® Bob-Tach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bob-Tach’s not using Power Bob-Tach Cylinder.
$24.95 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
$15.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$15.95 -
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
$19.95 Add to cartPivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
The Pivot Wedge fits between your Quick-Attach Handle and Wedge.
$19.95 -
Quick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach
$25.95 Add to cartQuick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach
Quick-Attach Handle (Left) [6702903-LH] for Bobcat® Bob-Tach
This is the left-side handle (while you’re sitting inside your machine).
$25.95
Showing 1–16 of 26 results