Bobcat S300
Showing 1–20 of 39 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$22.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$22.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
$3.99 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$3.99 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Sale! $11.95 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bobtach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bobtach operate like new.
$11.95 -
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Sale! $22.95 Add to cartBushing [6717259] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bobtach. The bushings eventually wear out causing a lot of play in your Bobtach. Replacing these weld-on bushings is a lot cheaper than buying a new Bobtach.
$22.95 -
Bushing [6717260] (Weld-On) for Bobcat® Bobtach
Sale! $29.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bobtach
Bushing [6717260] (Weld-On) for Bobcat® Bobtach
This bushing is welded into your Bobtach. These wear out over time causing a lot of play in your Bobtach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bobtach.
When replacing your old bushings in your Bobtach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$29.95 -
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
Sale! $22.95 Add to cartBushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
Bushing [6718329] (Press-In/Weld-On) for Bobcat® Bobtach
This bushing is press-fit into your Bobcat® Bobtach. Bushings simply wear out over causing a lot of play in your Bobtach.
Replacing bushings is a whole lot cheaper than buying a new Bobtach, and will help keep your machine operating like new.
$22.95 -
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
$89.99 Add to cartBushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
Bushing [6728999] (Weld-On) for Loader Lift Arm Boom | Bobcat®
This bushing comes welded into the Tapered Pivot Pin locations on your Loader’s Lift Arm. The holes are tapered internally for the holes in the Bob-Tach attachment mounting system to help reduce vibration. However, the tapered holes simply wear out over time not allowing for the Pivot Pins to stay tight.
Replacing these bushings is a whole lot less expensive than buying a new Loader Arm Assembly!
$89.99 -
Bushing [6729353] (Weld-On) | Bobcat® Bobtach
$89.99 Add to cartBushing [6729353] (Weld-On) | Bobcat® Bobtach
Bushing (Weld-On) [6729353] | Bobcat® Bobtach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bobtach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$89.99 -
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
$17.95 Add to cartBushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
Bushing [6805453] (Press-In/Weld-On) for Tilt Cylinder Rod | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT PART #: 7150182
This bushing is press-fit into Tilt Cylinder Rod Ends. In certain cases of excessive wear these can be welded in as well. Bushings simply wear out over time causing a lot of play in your Bobtach. Replacing these Bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$17.95 -
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Sale! $20.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$20.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Sale! $8.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bobtach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bobtach operate like new again.
$8.95 -
Compression Spring [6713040] for Handle | Bobcat® Bobtach
Sale! $7.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bobtach
Compression Spring [6713040] for Handle | Bobcat® Bobtach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bobtach operate like new again.
$7.95 -
Door Striker (Front) (Magnetic) [7109664] | Bobcat®
Sale! $14.95 Add to cartDoor Striker (Front) (Magnetic) [7109664] | Bobcat®
Front Door Striker (Magnetic) [7109664] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$14.95 -
Hydraulic Cylinder [6810611] | Bobcat® Power Bob-Tach™
$454.00 Add to cart -
Hydraulic Cylinder [7160395] | Bobcat® Power Bob-Tach™
$365.00 Add to cartHydraulic Cylinder [7160395] | Bobcat® Power Bob-Tach™
Hydraulic Cylinder [7160395] for Bobcat® Power Bobtach
This is an OEM Bobcat Hydraulic Cylinder which has one (1) 90° port and one (1) straight port. Please check your machine prior to ordering.
Our Hydraulic Cylinder has been completely inspected and in like-new condition.
Features:
- New Casing
- New Fittings
- New Rod
- New Seals
- New Grease Zerks
It has been completely remanufactured to original specifications.
$365.00 -
Hydraulic Cylinder [7208419] for Bucket Tilt | Bobcat®
$683.00 Add to cart -
Hydraulic Cylinders (x2) [7160395-Pair] | Bobcat® Power Bobtach
Sale! $799.95 Add to cartHydraulic Cylinders (x2) [7160395-Pair] | Bobcat® Power Bobtach
Hydraulic Cylinders (x2) [7160395-Pair] for Bobcat® Power Bobtach
These OEM Bobcat Hydraulic Cylinders each have one (1) 90° port and one (1) straight port. Please check your machine prior to ordering.
Our Hydraulic Cylinder has been completely inspected and in like-new condition. It has been completely remanufactured to original specifications.
Ready to bolt-on and use!
$799.95 -
Hydraulic Cylinders (x2) [7208419-Pair] for Bucket Tilt | Bobcat®
$1,299.00 Add to cart -
Hydraulic Lift Cylinder [7106456] | Bobcat®
$857.00 Add to cart -
Hydraulic Lift Cylinders (x2) [7106456-Pair] | Bobcat®
$1,550.00 Add to cart
Showing 1–20 of 39 results