Description
Fits Bobcat Models:
- Bobcat® 863
- Bobcat® 864
- Bobcat® A220
- Bobcat® T200
Included w/ Repair Kit:
- Handle Bushing
- Horizontal Gusset
- Repair Panel (Left)
Sale!
![RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6718752-RH-416x416.png)
![RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6718752-RH_Angle-A-416x416.png)
![RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6718752-RH_Angle-Back-416x416.png)
![RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6718752-RH.png)
![RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6718752-RH_Angle-A.png)
![RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6718752-RH_Angle-Back.png)
RVM® Repair Panel for Mount Plate Kit [6718752-RH] (3 Pieces) | Bobcat® Bob-Tach
In stock (can be backordered)
Original price was: $89.99.$84.95Current price is: $84.95.
RVM® Repair Panel for Mount Plate Kit [6718752-LH] (3 Pieces) | Bobcat® Bob-Tach
One of the most common failures of a Bobcat Bob-Tach is the top portion of the Bob-Tach itself – OEM material thickness is only 1/4″ – they simply wear thin, bend and break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our RVM Rebuild & Repair Panel Kit, you can replace these portions of your Bob-Tach to help make it appear & operate like new again – without spending $1300+ buying a new Bob-Tach.
When sitting in your machine, this Kit is for the Right Side.
Original price was: $89.99.$84.95Current price is: $84.95.
| Bobcat | Bobcat 863, Bobcat 864, Bobcat A220 (All-Wheel Steer), Bobcat T200 |
|---|
Additional information
| Bobcat | Bobcat 863, Bobcat 864, Bobcat A220 (All-Wheel Steer), Bobcat T200 |
|---|
Contact River Valley Machine
Questions, Comments?
You may also like…
-
RVM® Repair Panel for Mount Plate Kit [6718752-LH] (3 Pieces) | Bobcat® Bob-Tach
Sale! Original price was: $84.99.$84.95Current price is: $84.95. Add to cartRVM® Repair Panel for Mount Plate Kit [6718752-LH] (3 Pieces) | Bobcat® Bob-Tach
RVM® Repair Panel for Mount Plate Kit [6718752-LH] (3 Pieces) | Bobcat® Bob-Tach
One of the most common failures of a Bobcat Bob-Tach is the top portion of the Bob-Tach itself – OEM material thickness is only 1/4″ – they simply wear thin, bend and break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our RVM Rebuild & Repair Panel Kit, you can replace these portions of your Bob-Tach to help make it appear & operate like new again – without spending $1300+ buying a new Bob-Tach.
Original price was: $84.99.$84.95Current price is: $84.95. -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6709215
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
IMPORTANT NOTE: This adapter is set-up for use with either 1.5″ OD or 1.25″ OD Pivot pins. Please contact Pivot Pin Size prior to ordering Contact RVM, LLC.
$1,499.95 -
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter [6718752-HD] 863 864 T200 A220 Bobcat® Bob-Tach
$1,519.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter [6718752-HD] 863 864 T200 A220 Bobcat® Bob-Tach
River Valley Machine *HEAVY-DUTY* Quick-Attach Adapter Plate [6718752-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6718752
Stock Photo of Bobcat 853, except this adapter mounts to the outside of Boom Arm the same as OEM.
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,519.95
Related products
-
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
$89.99 Add to cartRVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With this Repair Panel Plate Kit from River Valley Machine, you can replace these portions of your Bob-Tach to help make it appear & operate like new again, without spending $1300+ buying a new Bob-Tach.
When sitting inside your machine, this is for the Right Side panel.
$89.99 -
Tail Light Assembly [6670284] | Bobcat®
$54.99 Add to cart
