Bobcat 653
Showing 1–16 of 41 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
$4.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$4.95 -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
$19.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bob-Tach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$19.95 -
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
$14.49 Add to cartBushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
Bushing [6702958] (Weld-On) for Lever Mount / Handle Stud | Bobcat® Bob-Tach
This bushing is welded into the frame of the Bob-Tach® and holds the lever in place. Fits LH or RH side.
Handle Studs support your universal quick-attach handle and the handle spring. The handle studs simply wear out over time… Replacing them will help keep the handles tight and help make your Bob-Tach operate like new.
$14.49 -
Bushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
$35.95 Add to cartBushing [6714874-HD] RVM® HD Bushing (Tapered / Weld-On) [HEAVY-DUTY] for Loader Lift Arm | Bobcat®
River Valley Machine Heavy-Duty Bushing [6714874-HD] (Tapered / Weld-On) for Loader Lift Arm | Bobcat®
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
$35.95 -
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95 -
Bushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bob-Tach
$34.95 Add to cartBushing [6731254] / Reducer (Tapered) for Lift / Loader Arm | Bobcat® Bob-Tach
Bushing / Reducer (Tapered) [6731254] for Loader Arm | Bobcat® Bob-Tach
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$34.95 -
Bushing [6731979] (Weld-On) for Bobcat® Bob-Tach
$64.95 Add to cartBushing [6731979] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6731979] | Bobcat® Bob-Tach
This bushing is welded onto your Bob-Tach. Bushings wear out over time causing a lot of play in your Bob-Tach.
Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$64.95 -
Bushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
$45.95 Add to cartBushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
Bushing [6732446] (Press-In/Weld-On) Step Bushing for Lower Bob-Tach | Bobcat®
This bushing is press-fit into your 50 Series Bobcat Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. Replacing these Bushings is required and will keep your machine operating like new.
In certain cases of excessive wear, these repair bushings can be welded in as well.
$45.95 -
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
$19.49 Add to cartBushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for BOBCAT® PART #: 6800227
COMPATIBLE w/ BOBCAT® PART #: 6589665Bushing for Tilt Cylinder Rod End.
$19.49 -
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Door Latch Striker (Front) [6568047] | Bobcat®
$18.95 Add to cartDoor Latch Striker (Front) [6568047] | Bobcat®
Door Latch Striker (Front) [6568047] | Bobcat®
Door Strikers simply wear out over time causing safety concerns. Replacing them will help keep your door operating like new.
$18.95 -
Door Latch Striker (Rear) [6715157] | Bobcat®
$21.95 Add to cartDoor Latch Striker (Rear) [6715157] | Bobcat®
Door Latch Striker (Rear) [6715157] | Bobcat®
Rear Door Strikers wear out over time. Replacing them will help keep your door operating like new.
$21.95 -
Drive Belt Tensioner Pulley [6704391] | Bobcat®
$72.95 Add to cartDrive Belt Tensioner Pulley [6704391] | Bobcat®
Drive Belt Tensioner Pulley [6704391] | Bobcat®
$72.95 -
Handle Stud [6562013] | Bobcat®
$18.95 Add to cartHandle Stud [6562013] | Bobcat®
Handle Stud [6562013] | Bobcat®
The Handle Stud supports the Quick-Attach Handle and Handle Spring.
Handle Studs eventually wear out… Replacing them will help keep your handles tight and can help keep your Bob-Tach operating like new.
$18.95
Showing 1–16 of 41 results