Bobcat 520
Showing all 5 results
-
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
$4.95 Add to cartBolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
Bolt [17C652] for Loader’s Lift Arm & Quick-Attach Handle | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 17C660
Hexagon head bolt designed for the tough jobs that Bobcat equipment can handle.
Features:
Pre-applied thread locker
$4.95 -
Bushing [6562067] (Press-In/Weld-On) for Bobcat® Bob-Tach
$19.95 Add to cartBushing [6562067] (Press-In/Weld-On) for Bobcat® Bob-Tach
Bushing (Press-In/Weld-On) [6562067] for Bobcat® Bob-Tach
This bushing is press-fit into your Bobcat® Bob-Tach. In certain cases of excessive wear, these bushings can be welded in as well.
Bushings wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is required and will keep your machine operating like new.
These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
$19.95 -
Bushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
$19.95 Add to cartBushing [6589665] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing [6589665] (Press-In / Weld-On) | Bobcat® Bob-Tach
COMPATIBLE w/ BOBCAT PART #: 6805150
This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
$19.95 -
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49
Showing all 5 results