River Valley Machine relies on Flat-Rate Shipping for the majority of our top-quality parts & accessories. RVM is no longer...
Read More
Bobcat® 753L
Showing 33–48 of 51 results
-
![Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6731119-324x324.png)
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
$19.95 Add to cartPivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
The Pivot Wedge fits between your Quick-Attach Handle and Wedge.
$19.95 -
![Quick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/6702903-LH-324x324.png)
Quick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach
$25.95 Add to cartQuick-Attach Handle (Left) [6702903] | Bobcat® Bob-Tach
Quick-Attach Handle (Left) [6702903-LH] for Bobcat® Bob-Tach
This is the left-side handle (while you’re sitting inside your machine).
$25.95 -
![Rod Eye [6804674] for Hydraulic Cylinder w/ Zerk on Bobcat Single-Tilt Machines](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6804674-324x324.png)
Rod Eye (Weld-On) [6804674] for Hydraulic Cylinders on Single-Tilt Machines | Bobcat®
$109.95 Add to cartRod Eye (Weld-On) [6804674] for Hydraulic Cylinders on Single-Tilt Machines | Bobcat®
Rod Eye (Weld-On) [6804674] for Hydraulic Cylinders on Single-Tilt Machines | Bobcat®
COMPATIBLE w/ BOBCAT PART #: 6705223
Rod Eyes on Single-Tilt Hydraulic Cylinders wear out over time causing excessive slack in your pin. This Weld-On Rod Eye can help put your Tilt Cylinder back to safe specifications.
Does require the removal of old Tilt Cylinder Rod Eye and welding new one in place… Much less expensive than buying a new Rod or Tilt Cylinder.
$109.95 -
![Roll Pin / Spring Pin [7277777] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/06/7277777-324x324.png)
Roll Pin / Spring Pin [7277777] | Bobcat® Bob-Tach
$5.95 Add to cartRoll Pin / Spring Pin [7277777] | Bobcat® Bob-Tach
Roll Pin / Spring Pin [7277777] | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 14J5032
$5.95 -
RVM® Handle Kit [LH] | Bobcat® Bob-Tach
$69.99 Add to cart -
RVM® Handle Kit [RH] | Bobcat® Bob-Tach
$69.99 Add to cart -
![RVM® Handle Rebuild Kit [LH] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/RVM-Kit_Handle-Kit-LH_Bobcat-Bob-Tach-324x324.png)
RVM® Handle Rebuild Kit [LH] | Bobcat® Bob-Tach
Sale! Price range: $2.19 through $25.95 Add to cartRVM® Handle Rebuild Kit [LH] | Bobcat® Bob-Tach
Handle Rebuild Kit [LH] (12 Pieces) for Bobcat® Bob-Tach
Also Available As Complete Kit:
Price range: $2.19 through $25.95 -
![RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6577986-HD-324x324.png)
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853
$1,599.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach 853
River Valley Machine HD Quick-Attach Adapter Plate [6577986-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6577986
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
$1,599.95 -
![RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/RVM_6709215-HD-324x324.png)
RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
$1,499.95 Call RVM to OrderRVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130
River Valley Machine Heavy-Duty Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach
RVM Upgrade Replaces Bobcat® Bob-Tach 6709215
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Ready to bolt on and use!
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
IMPORTANT NOTE: This adapter is set-up for use with either 1.5″ OD or 1.25″ OD Pivot pins. Please contact Pivot Pin Size prior to ordering Contact RVM, LLC.
$1,499.95 -
RVM® Lift / Loader Arm Repair Kit | Bobcat® Bob-Tach
Sale! Price range: $9.95 through $39.95 Add to cartRVM® Lift / Loader Arm Repair Kit | Bobcat® Bob-Tach
River Valley Machine Lift / Loader Arm Repair Kit | Bobcat® Bob-Tach
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
River Valley Machine’s Loader Arm Boom Repair Kit for Bobcat Bob-Tach is very heavy duty.
To install, you must cut off the end of your Loader Arm and weld busing in place.Available Parts:
- Bushing (Weld-On) *HEAVY-DUTY* for Boom Lift Arm [7160425]
- Pivot Pin [7101078]
- Bolt [47C1088]
- Washer [27E10]
Price range: $9.95 through $39.95 -
![RVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/RVM-Kit_Quick-Attach-Handle_Bobcat-Bob-Tach_RH-Complete-324x324.png)
RVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
$69.99 Add to cartRVM® Quick-Attach Handle / Wedge Rebuild Kit [6702904-RH-Complete] | Bobcat® Bob-Tach
RVM Quick-Attach Handle Rebuild Kit [RH-Complete] (12 Pieces) | Bobcat® Bob-Tach
Parts Included w/ Kit:
- Quick-Attach Handle (Right) [6702904-RH]
- Handle Spring [6713040]
- Washer [619021]
- Lock Nut [85D6]
- Bolt [17C660]
- Handle Stud (Weld-On) [6702958]
- Shoulder Bolt [6728473]
- Pivot Wedge [6731119]
- Compression Spring [6578253]
- Pivot Wedge [6704248]
- Spring Pin [14J5032]
- Wedge
Parts Also Available Individually:
$69.99 -
![RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/RVM-Kit_Handle-Kit-RH_Bobcat-Bob-Tach-324x324.png)
RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bob-Tach
Sale! Price range: $2.19 through $25.95 Add to cartRVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) | Bobcat® Bob-Tach
RVM® Quick-Attach Handle Rebuild Kit [6702904-RH] (12 Pieces) for Bobcat® Bob-Tach
Available As Complete Kit:
Price range: $2.19 through $25.95 -
![RVM® Quick-Attach Handle Rebuild Kit [LH-Complete] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/RVM-Kit_Handle_LH-Complete-324x324.png)
RVM® Quick-Attach Handle Rebuild Kit [LH-Complete] | Bobcat® Bob-Tach
$69.99 Add to cartRVM® Quick-Attach Handle Rebuild Kit [LH-Complete] | Bobcat® Bob-Tach
RVM Handle Rebuild Kit [LH-Complete] (12 Pieces) for Bobcat® Bob-Tach
Parts Included w/ Kit:
- Handle (Left) [6702903]
- Handle Spring [6713040]
- Washer [619021]
- Lock Nut [85D6]
- Bolt [17C660]
- Bushing (Weld-On) for Handle [6702958]
- Shoulder Bolt [6728473]
- Pivot Wedge [6731119]
- Compression Spring [6578253]
- Pivot Wedge [6704248]
- Spring Pin [14J5032]
Parts Available Individually:
$69.99 -
![RVM® Repair Panel Plate Kit (3 Pieces) [6577986-RH] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6577986-RH-324x324.png)
RVM® Repair Panel Plate Kit (3 Pieces) [6577986-RH] | Bobcat® Bob-Tach
Sale! Original price was: $89.99.$84.95Current price is: $84.95. Add to cartRVM® Repair Panel Plate Kit (3 Pieces) [6577986-RH] | Bobcat® Bob-Tach
RVM Repair Panel Plate Kit (3 Pieces) [6577986-RH] | Bobcat® Bob-Tach
A common failure of a Bobcat® is the top portion of the Bob-Tach. They wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
This is for the Right Side Panel (while you are sitting in your machine).
Original price was: $89.99.$84.95Current price is: $84.95. -
RVM® Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach
$89.95 Add to cartRVM® Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach
RVM Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach
A common failure of a Bobcat® is the top portion of the Bob-Tach. They wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
This is for the Right Side Panel (while you are sitting in your machine).
$89.95 -
![RVM® Repair Panel Plate Kit [6709215-LH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/6709215-LH-324x324.png)
RVM® Repair Panel Plate Kit [6709215-LH] (3 Pieces) | Bobcat® Bob-Tach
$89.95 Add to cartRVM® Repair Panel Plate Kit [6709215-LH] (3 Pieces) | Bobcat® Bob-Tach
RVM® Repair Panel Plate Kit [6709215-LH] (3 Pieces) | Bobcat® Bob-Tach
A common failure of a Bobcat® is the top portion of the Bob-Tach. They wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
This is for the Left Side Panel (while you are sitting in your machine).
$89.95
Showing 33–48 of 51 results