![RVM® Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/6709215-RH.png)
![RVM® Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/6709215-A.png)
![RVM® Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach - Image 4](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/6709215_OEM-Stock_Face.png)
![RVM® Repair Panel Plate Kit (3 Pieces) [6709215-RH] | Bobcat® Bob-Tach - Image 5](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/6709215_OEM-Stock_Front.png)
Only 3 left in stock (can be backordered)
$89.95
A common failure of a Bobcat® is the top portion of the Bob-Tach. They wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
This is for the Right Side Panel (while you are sitting in your machine).
$89.95
| Bobcat | Bobcat 631, Bobcat 645, Bobcat 653, Bobcat 742, Bobcat 743, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat S130, Bobcat T140 |
|---|
| Bobcat | Bobcat 631, Bobcat 645, Bobcat 653, Bobcat 742, Bobcat 743, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat S130, Bobcat T140 |
|---|
![RVM® HD *HEAVY-DUTY* Quick-Attach Adapter Plate [6709215-HD] | Bobcat® Bob-Tach 742 | 743 | 751 | 753 | 763 | 773 | ST 7753 | S130](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/RVM_6709215-HD-324x324.png)
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
![RVM® Repair Panel Plate Kit [6709215-LH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/6709215-LH-324x324.png)
A common failure of a Bobcat® is the top portion of the Bob-Tach. They wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
This is for the Left Side Panel (while you are sitting in your machine).
The Wedge Pin attaches to the handles of a Bob-Tach. Wedges hold the Quick-Attach to the bucket or attachment. Wedges simply get rusty and worn out over time… Replacing them will help keep your Bob-Tach operating like new.
When sitting in your machine, this would be the Left-Side Wedge.
![Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/06/6578253-324x324.png)
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
This Pivot Pin is used between your Skid-Steer’s Loader Arms and the Bob-Tach… These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing your pins can help make your Bobcat operate like new again!
River Valley Machine will include 5/8″ Hex Bolt Grade 8
