Bobcat® Bob-Tach™ Attachments
Showing 33–48 of 84 results
-
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
$59.95 Add to cartPivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used loader’s Upper Tilt Cylinder. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing your Pivot Pins can help make your Bobcat operate like new.
$59.95 -
Pivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bob-Tach
$32.95 Add to cartPivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6729358] for Lift / Loader Arm | Bobcat® Bob-Tach
This pin is used between your Lift / Loader Arms and the Bob-Tach. These pins wear out over time causing a lot of play in your Bob-Tach. Replacing these pins can help make your Bobcat® operate like new.
RVM Tips & Recommendations: When changing your Pivot Pin, River Valley Machine encourages you to also replace your Bushing (Press-In) [7139943]
$32.95 -
Pivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach
This pin is used between the loader arms and Bob-Tach. These pins wear out over time causing a lot of play in your Bob-Tach. Replacing these pins will help make your Bobcat operate like new.
RVM Tip: This is the 1.50″ Pivot Pin w/ 3/4-10 Thread. To check your machine, simply remove the Pivot Pin bolt on your Lower Lift Arm and see if you have a 3/4-10″ bolt.
$29.95 -
Pivot Pin (Tapered) [6732012] for Loader Arm | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (Tapered) [6732012] for Loader Arm | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6732012] for Loader Arm | Bobcat® Bob-Tach
REPLACEMENT for Bobcat Part #: 6707042
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing these pins can help make your Bobcat® Bob-Tach operate like new.
$29.95 -
Pivot Pin (Tapered) [6734661] for Loader Arms | Bobcat® Bob-Tach
$25.95 Add to cartPivot Pin (Tapered) [6734661] for Loader Arms | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6734661] for Loader Arms | Bobcat® Bob-Tach
This Pivot Pin is used between the Loader Arms and your Bobcat Bob-Tach… These pins simply wear out over time causing a lot of play in your Bob-Tach. Replacing these pins will help make your Bobcat operate like new.
$25.95 -
Pivot Pin (Tapered) [7101078] w/ Bolt for Loader Arms / Lower Bob-Tach | Bobcat®
$25.95 Add to cartPivot Pin (Tapered) [7101078] w/ Bolt for Loader Arms / Lower Bob-Tach | Bobcat®
Pivot Pin (Tapered) [7101078] for Loader Arms / Lower Bob-Tach | Bobcat®
REPLACEMENT for BOBCAT PART #: 6734661
This Pivot Pin is used between your Skid-Steer’s Loader Arms and the Bob-Tach… These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing your pins can help make your Bobcat operate like new again!
Bolt Included with your order!
River Valley Machine will include 5/8″ Hex Bolt Grade 8
$25.95 -
Pivot Pin (Tapered) [7135590] | Bobcat® Bob-Tach
$32.95 Add to cartPivot Pin (Tapered) [7135590] | Bobcat® Bob-Tach
Pivot Pin (Tapered) [7135590] for Lift / Loader Arm & Lower Bob-Tach | Bobcat®
This Pivot Pin is used between your Lift / Loader Arms and the Bob-Tach. The pin attaches the Lift Arm to the Bob-Tach system.
Pivot Pins eventually wear out, causing a lot of play in your Bob-Tach. Replacing these pins can help make your Bobcat® operate like new again.
$32.95 -
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
$24.95 Add to cartPivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for Bobcat Part #: 6700037
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
$24.95 -
Pivot Wedge [6704240] | Bobcat® Bob-Tach
$24.95 Add to cartPivot Wedge [6704240] | Bobcat® Bob-Tach
Pivot Wedge [6704240] | Bobcat® Bob-Tach
The Pivot Wedge fits between the Quick-Attach Handle and Wedge. This Pivot Wedge fits Bob-Tach’s not using Power Bob-Tach Cylinder.
$24.95 -
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
$15.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$15.95 -
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
$19.95 Add to cartPivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
Pivot Wedge [6731119] for Quick-Attach Handle | Bobcat® Bob-Tach
The Pivot Wedge fits between your Quick-Attach Handle and Wedge.
$19.95 -
Quick-Attach Handle (Left) [6563106] | Bobcat Bob-Tach
$39.95 Add to cartQuick-Attach Handle (Left) [6563106] | Bobcat Bob-Tach
Quick-Attach Handle (Left) [6563106-LH] | Bobcat Bob-Tach
Bob-Tach handles wear out over time… Replacing them can help keep your Bob-Tach operating like new.
When sitting in your machine this would be the Left Hand Handle.
$39.95 -
Quick-Attach Handle (Right) [6563107-RH] | Bobcat® Bob-Tach
$39.95 Add to cartQuick-Attach Handle (Right) [6563107-RH] | Bobcat® Bob-Tach
Quick-Attach Handle (Right) [6563107-RH] | Bobcat® Bob-Tach
Bob-Tach handles wear out over time… Replacing them will hep keep your Bob-Tach operating like new.
When sitting in your machine this would be the Right Hand Handle.
$39.95 -
Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
$25.95 Add to cartQuick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
RVM® Quick-Attach Handle (Right) [6702904-RH] | Bobcat® Bob-Tach
Right Handle [6702904-RH]
Available w/ Kit:
$25.95 -
Rod Eye (Weld-On) [6804674] for Hydraulic Cylinders on Single-Tilt Machines | Bobcat®
$109.95 Add to cartRod Eye (Weld-On) [6804674] for Hydraulic Cylinders on Single-Tilt Machines | Bobcat®
Rod Eye (Weld-On) [6804674] for Hydraulic Cylinders on Single-Tilt Machines | Bobcat®
COMPATIBLE w/ BOBCAT PART #: 6705223
Rod Eyes on Single-Tilt Hydraulic Cylinders wear out over time causing excessive slack in your pin. This Weld-On Rod Eye can help put your Tilt Cylinder back to safe specifications.
Does require the removal of old Tilt Cylinder Rod Eye and welding new one in place… Much less expensive than buying a new Rod or Tilt Cylinder.
$109.95 -
RVM® Handle Rebuild Kit [LH] | Bobcat® Bob-Tach
Sale! $2.19 – $25.95 Add to cartRVM® Handle Rebuild Kit [LH] | Bobcat® Bob-Tach
Handle Rebuild Kit [LH] (12 Pieces) for Bobcat® Bob-Tach
Also Available As Complete Kit:
$2.19 – $25.95
Showing 33–48 of 84 results