Bobcat® Bob-Tach™ Attachments
Showing 17–32 of 84 results
-
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
$22.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$22.95 -
Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach
$54.95 Add to cartBushing [7140168] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7140168] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95 -
Bushing [7148022] (Weld-On) for Bobcat® Bob-Tach
$60.95 Add to cartBushing [7148022] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7148022] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment.
Removing your old worn-out bushings and welding in these new bushings, is a lot cheaper than buying a new Bob-Tach®, and can help make your machine operate like new.
$60.95 -
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
$34.95 Add to cartBushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
Bushing [7160425] (Weld-On) for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$34.95 -
Bushing [7160425] RVM® HD Bushing (Tapered / Weld-On) 2 5/8 OD for Lift / Loader Arm Boom | Bobcat® Bob-Tach
$39.95 Add to cartBushing [7160425] RVM® HD Bushing (Tapered / Weld-On) 2 5/8 OD for Lift / Loader Arm Boom | Bobcat® Bob-Tach
RVM® HD Bushing (Tapered / Weld-On) [7160425-HD] for Loader Lift Arm Boom | Bobcat® Bob-Tach
This bushing is welded into your loader arm / boom tapered pivot pin locations. The tapered holes wear out over time, not allowing for the tapered pivot pins to stay tight.
Replacing these bushings is a lot cheaper than buying a new Loader Arm Assembly.
$39.95 -
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
$34.95 Add to cartBushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach
This Bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and can help keep your machine operating like new.
$34.95 -
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
$105.95 Add to cartBushing [7215408] (Weld-On) for Bobcat® Bob-Tach
Bushing [7215408] (Weld-On) for Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 7170610
This bushing is welded into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach… Replacing these bushings is a whole lot cheaper than buying a new Loader Arm Assembly, and will help keep your machine operating like new.
Our Weld-On Bushing includes Bushing (Press-In) [7170615]
$105.95 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95 -
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
$9.95 Add to cartCompression Spring [6713040] for Handle | Bobcat® Bob-Tach
Compression Spring [6713040] for Handle | Bobcat® Bob-Tach
This Compression Spring keeps the handles in the ‘up’ position and keeps your handles nice & tight.
Replacing the Compression Springs in your Quick-Attach Handles can help make your Bob-Tach operate like new again.
$9.95 -
Handle Stud [6562013] | Bobcat®
$18.95 Add to cartHandle Stud [6562013] | Bobcat®
Handle Stud [6562013] | Bobcat®
The Handle Stud supports the Quick-Attach Handle and Handle Spring.
Handle Studs eventually wear out… Replacing them will help keep your handles tight and can help keep your Bob-Tach operating like new.
$18.95 -
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
$4.49 Add to cartLock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
Lock Nut [85D6] for Loader’s Lift Arm & Quick-Attach Handle & Door (Rear) | Bobcat®
HEX LOCK NUT PRETRQ
$4.49 -
Nut [7D8]
$4.49 Add to cart -
Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used between the Lower Tilt Cylinder and your Bobcat® Bob-Tach.
This is a solid pivot pin – the pin does not have a grease zerk hole.
$29.95 -
Pivot Pin (Tapered) [6559018] for Loader Arms | Bobcat® Articulated Loaders
$34.95 Add to cartPivot Pin (Tapered) [6559018] for Loader Arms | Bobcat® Articulated Loaders
Pivot Pin (Tapered) [6559018] for Loader Arms | Bobcat® Bob-Tach
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing these pins will help keep your Bobcat operating like new.
$34.95 -
Pivot Pin (Tapered) [6707042] for Loader Arm | Bobcat® Bob-Tach
$29.95 Add to cart -
Pivot Pin (Tapered) [6707180] for Loader Arms | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (Tapered) [6707180] for Loader Arms | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6707180] for Loader Arms | Bobcat® Bob-Tach
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing these pins will help make your Bobcat operate like new.
$29.95
Showing 17–32 of 84 results