Description
Dimensions
1.25″ (31,8 mm) ID
1.442″ OD
2″ Length
For Use With:
1.25″ ID Pin
In stock (can be backordered)
$22.49
This bushing is press-fit into the rear of your loader arms. In certain cases of excessive wear these can be welded in as well.
These bushings simply wear out over time causing a lot of play in your Bobcat®. Replacing these Bushings, when required, will help keep your machine operating like new.
$22.49
Dimensions | 2 × 1.44 in |
---|---|
Bobcat |
1.25″ (31,8 mm) ID
1.442″ OD
2″ Length
1.25″ ID Pin
Dimensions | 2 × 1.44 in |
---|---|
Bobcat |
The Wedge Pin attaches to the handles of a Bob-Tach. Wedges hold the Quick-Attach to the bucket or attachment. Wedges simply get rusty and worn out over time… Replacing them will help keep your Bob-Tach operating like new.
When sitting in your machine, this would be the Left-Side Wedge.
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts