River Valley Machine relies on Flat-Rate Shipping for the majority of our top-quality parts & accessories. RVM is no longer...
Read More
Bobcat Skid-Steer
Showing all 16 results
-
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
Bushing [6711404] (Weld-On) for Bobcat® Bob-Tach
$59.95 Add to cartBushing [6711404] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6711404] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bob-Tach®.
$59.95 -
Bushing [6713156] (Weld-On) for Bobcat® Bob-Tach
$79.95 Add to cartBushing [6713156] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [6713156] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment.
Replacing the bushings, when necessary, can help keep your machine operating like new and is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$79.95 -
Bushing [7136465] (Weld-On) for Bobcat® Bob-Tach
$69.95 Add to cartBushing [7136465] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7136465] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach®! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$69.95 -
Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach
$54.95 Add to cartBushing [7140168] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7140168] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95 -
Bushing [7148022] (Weld-On) for Bobcat® Bob-Tach
$60.95 Add to cartBushing [7148022] (Weld-On) for Bobcat® Bob-Tach
Bushing (Weld-On) [7148022] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment.
Removing your old worn-out bushings and welding in these new bushings, is a lot cheaper than buying a new Bob-Tach®, and can help make your machine operate like new.
$60.95 -
Exhaust Pipe (Turbo) [6677371] w/ Gasket | Bobcat®
$74.95 Add to cartExhaust Pipe (Turbo) [6677371] w/ Gasket | Bobcat®
Exhaust Pipe (Turbo) [6677371] w/ Gasket | Bobcat®
This part is a genuine OEM part – not aftermarket – like our competitors are often offering.
$74.95 -
Exhaust Pipe (Turbo) [6701151] | Bobcat®
$64.95 Add to cartExhaust Pipe (Turbo) [6701151] | Bobcat®
Exhaust Pipe [6701151] | Bobcat®
This part is a genuine OEM part – not aftermarket – like our competitors are often offering.
$64.95 -
Exhaust Pipe (Turbo) [7107449] w/ Gasket | Bobcat®
$49.95 Add to cartExhaust Pipe (Turbo) [7107449] w/ Gasket | Bobcat®
Exhaust Pipe (Turbo) [7107449] w/ Gasket | Bobcat®
This is a genuine OEM part – not aftermarket – like our competitors are often offering.
$49.95 -
Pivot Pin (Tapered) [6707042] for Loader Arm | Bobcat® Bob-Tach
$29.95 Add to cart -
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
$59.95 Add to cartPivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6728971] for Upper Tilt Cylinder | Bobcat® Bob-Tach
This Pivot Pin is used loader’s Upper Tilt Cylinder. These pins eventually wear out causing a lot of play in your Bob-Tach. Replacing your Pivot Pins can help make your Bobcat operate like new.
$59.95 -
Pivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach
$29.95 Add to cartPivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach
Pivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach
This pin is used between the loader arms and Bob-Tach. These pins wear out over time causing a lot of play in your Bob-Tach. Replacing these pins will help make your Bobcat operate like new.
RVM Tip: This is the 1.50″ Pivot Pin w/ 3/4-10 Thread. To check your machine, simply remove the Pivot Pin bolt on your Lower Lift Arm and see if you have a 3/4-10″ bolt.
$29.95 -
RVM® Pallet Fork w/ Walk-Thru
$850.00 Call RVM to OrderRVM® Pallet Fork w/ Walk-Thru
River Valley Machine Pallet Fork w/ Walk-Thru for Skid-Steer Loader
- 48″ Tines
- Fully Adjustable
- Rated for 4,500 lbs
$850.00 -
RVM® Quick-Attach Adapter Plate (3/8″) [SOLID]
$175.00 Add to cartRVM® Quick-Attach Adapter Plate (3/8″) [SOLID]
RVM® Quick Attach Adapter Plate (3/8″) SOLID
River Valley Machine also offers 5/16″ solid quick attach adapter plate…
$175.00 -
RVM® Universal Quick-Attach Mount Plate / Adapter [5/16″] SOLID
$150.00 Add to cartRVM® Universal Quick-Attach Mount Plate / Adapter [5/16″] SOLID
RVM® Universal Quick-Attach Mount Plate / Adapter [5/16″] SOLID for Skid-Steer Loaders
With River Valley Machine’s Universal Quick-Attach Mounting Plate Adapter Kit, you can modify your existing equipment to use modern skid-steer loader attachments.
Our Universal Quick-Attach Mount Plate / Adapter is constructed of top-quality materials:
- 5/16″ Grade 50 Steel
- 3/8″ Top Hanger
River Valley Machine, LLC also offers 3/8″ solid quick attach adapter plate…
$150.00 -
Water Pump [7000743] w/ Gasket | Bobcat®
Sale! Original price was: $84.99.$79.95Current price is: $79.95. Add to cartWater Pump [7000743] w/ Gasket | Bobcat®
Water Pump [7000743] w/ Gasket | Bobcat®
This is an OEM-style Water Pump w/ Gasket.
Original price was: $84.99.$79.95Current price is: $79.95.
Showing all 16 results