Description
Dimensions
2.75″ OD
3.8″ Length
Bushing (Weld-On) [7216404] w/ Bushing (Press-In) [6730997]
Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
In stock (can be backordered)
$79.95
Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
This Bushing is used on your Lower Bob-Tach. Bushings simply wear out over time, causing a lot of play in your Bob-Tach.
Removing the worn-out old bushings and replacing w/ new bushings from RVM can help make your machine operate like new.
$79.95
| Weight | 3.03125 lbs |
|---|---|
| Dimensions | 3.8 × 2.75 in |
| Bobcat | Bobcat S510, Bobcat S530, Bobcat S550, Bobcat S570, Bobcat S590, Bobcat S595 |
Additional information
| Weight | 3.03125 lbs |
|---|---|
| Dimensions | 3.8 × 2.75 in |
| Bobcat | Bobcat S510, Bobcat S530, Bobcat S550, Bobcat S570, Bobcat S590, Bobcat S595 |
Contact River Valley Machine
Questions, Comments?
You may also like…
-
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95
Related products
-
RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
Sale! $84.95 Add to cartRVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With this Repair Panel Plate Kit from River Valley Machine, you can replace these portions of your Bob-Tach to help make it appear & operate like new again, without spending $1300+ buying a new Bob-Tach.
When sitting inside your machine, this is for the Right Side panel.
$84.95 -
RVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
$425.00 Call RVM to OrderRVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
River Valley Machine Universal Quick-Attach Adapter Assembly
RVM’s Quick-Attach System uses OEM Case® / New Holland® parts. All internal parts are replaceable at your local Case® / New Holland® Dealer.
In our experiences, the Case® / New Holland® design is one of the best on the market for retrofitting your older machine.
Why our Quick-Attach System is Better than our Competitor/s…
- Heavy-Duty Cast Steel Handles w/ OEM Parts
- Meets / exceeds OEM Standards & Quality
- Lowest cost, most versatile design on the market.
- Greaseable Pin & Bushing design
- All moveable internal parts are protected from dirt debris and damage
- Large surface area to weld on your cylinder mounts to the back of the latch box
- Thin assembly design helps keep the attachments closer to your machine for increased lift capacity
- Supports up to 2,750 lbs lift / 5,500 lbs tip weight on attachment (but only weighs 85 lbs)!
Includes w/ Kit:
Buyer will receive one Heavy Duty High-Quality Quick Attach Assembly complete with all internal parts, handles, springs, pins, bolts. This assembly will be shipped unpainted for ease of welding.
$425.00 -
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
$10.95 Add to cartCompression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach
REPLACEMENT FOR BOBCAT® PART #: 6960841
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.
$10.95
