Description
Dimensions
2.75″ OD
3.8″ Length
Bushing (Weld-On) [7216404] w/ Bushing (Press-In) [6730997]
![Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat® - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/7216404_Diagram.png)
Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
In stock (can be backordered)
$79.95
Bushing [7216404] (Weld-On) for Lower Bob-Tach | Bobcat®
This Bushing is used on your Lower Bob-Tach. Bushings simply wear out over time, causing a lot of play in your Bob-Tach.
Removing the worn-out old bushings and replacing w/ new bushings from RVM can help make your machine operate like new.
$79.95
| Weight | 3.03125 lbs |
|---|---|
| Dimensions | 3.8 × 2.75 in |
| Bobcat | Bobcat S510, Bobcat S530, Bobcat S550, Bobcat S570, Bobcat S590, Bobcat S595 |
Additional information
| Weight | 3.03125 lbs |
|---|---|
| Dimensions | 3.8 × 2.75 in |
| Bobcat | Bobcat S510, Bobcat S530, Bobcat S550, Bobcat S570, Bobcat S590, Bobcat S595 |
Contact River Valley Machine
Questions, Comments?
You may also like…
-
Bushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
$12.95 Add to cartBushing [6730997] (Press-In/Weld-On) | Bobcat® Bob-Tach
Bushing (Press-In / Weld-On) [6730997] | Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
$12.95
Related products
-
Pivot Pin 6718789 6547595 for Lift / Loader Arm & Lift Cylinder | Bobcat®
$24.95 Add to cartPivot Pin 6718789 6547595 for Lift / Loader Arm & Lift Cylinder | Bobcat®
Pivot Pin [6718789] for Lift / Loader Arm & Lift Cylinder | Bobcat®
This Pivot Pin is used between your Loader Arms and the Lift Cylinder. These pins simply wear out over time causing a lot of play with your Loader Arms. Replacing these pins can help make your Bobcat operate like new.
$24.95 -
![Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/06/6704248-324x324.png)
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
$15.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$15.95 -
![Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6737088-324x324.png)
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
$24.95
