In stock (can be backordered)
$34.95
This Bushing is used between your Loader Arms and the Tapered Pivot Pins. Our Bushing can be used to repair worn out tapers in the lower end of your Loader Arms.
These bushings can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins.
$34.95
| Weight | 0.2125 lbs |
|---|---|
| Dimensions | 1.65 × 1.475 in |
| Bobcat | Bobcat 530, Bobcat 533, Bobcat 540, Bobcat 542B, Bobcat 543, Bobcat 553, Bobcat 630, Bobcat 631, Bobcat 632, Bobcat 641, Bobcat 642, Bobcat 643, Bobcat 645, Bobcat 653, Bobcat 730, Bobcat 731, Bobcat 732, Bobcat 741, Bobcat 742, Bobcat 743, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat S130 |
1.65″ Long OD
TAPER
1.280 SMALL
1.475 LARGE
This Bushing can also be used to reduce current 1.5″ OD pins to accommodate 1.25″ OD Bolt / Pins
Weld-On for use with any machine using our 1.25″ OD Pins
| Weight | 0.2125 lbs |
|---|---|
| Dimensions | 1.65 × 1.475 in |
| Bobcat | Bobcat 530, Bobcat 533, Bobcat 540, Bobcat 542B, Bobcat 543, Bobcat 553, Bobcat 630, Bobcat 631, Bobcat 632, Bobcat 641, Bobcat 642, Bobcat 643, Bobcat 645, Bobcat 653, Bobcat 730, Bobcat 731, Bobcat 732, Bobcat 741, Bobcat 742, Bobcat 743, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat S130 |
This Pivot Pin is used between your Loader Arms and the Bob-Tach. These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing these pins can help make your Bobcat® Bob-Tach operate like new.
The Wedge Pin attaches to the handles of a Bob-Tach. Wedges hold the Quick-Attach to the bucket or attachment. Wedges simply get rusty and worn out over time… Replacing them will help keep your Bob-Tach operating like new.
When sitting in your machine, this would be the Left-Side Wedge.
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
