Description
Dimensions
4″ Long
3″ OD
1.75″ ID
Bushing (Weld-On) [6729353] with Bushing (Press-In) [7139943]
![Bushing [6729353] (Weld-On) | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/6729353_Angle-R.png)
Bushing [6729353] (Weld-On) | Bobcat® Bob-Tach
Only 5 left in stock (can be backordered)
$92.95
Bushing (Weld-On) [6729353] | Bobcat® Bob-Tach
This Pivot Bushing is used on your lower Bob-Tach. The bushings eventually wear out causing a lot of play and other issues with your Bob-Tach. Removing the old bushings and welding in new ones can help make your machine operate like new.
Our replacement Pivot Bushing (Weld-On) [6729353] ships complete with Bushing (Press-In) [7139943]
RVM RECOMMENDATIONS & TIPS: Please note River Valley Machine suggests you also change Bobcat Pin [6729358]
$92.95
| Weight | 4.9375 lbs |
|---|---|
| Dimensions | 4 × 3 in |
| Bobcat | Bobcat A300 (All-Wheel Steer), Bobcat S220, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T250, Bobcat T300, Bobcat T320 |
Additional information
| Weight | 4.9375 lbs |
|---|---|
| Dimensions | 4 × 3 in |
| Bobcat | Bobcat A300 (All-Wheel Steer), Bobcat S220, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T250, Bobcat T300, Bobcat T320 |
Contact River Valley Machine
Questions, Comments?
You may also like…
-
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
$22.95 Add to cartBushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
Bushing [7139943] (Press-In/Weld-On) for Pivot Pin | Lower Bobcat® Bob-Tach
This Bushing is press-fit into your Bob-Tach. The bushings wear out over time causing a lot of play in your Bob-Tach. When required, replacing these hardened bushings will keep your machine operating like new.
IMPORTANT RVM Product Tip: This Bushing does NOT feature a grease groove.
$22.95
Related products
-
RVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
$450.00 Call RVM to OrderRVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
River Valley Machine Universal Quick-Attach Adapter Assembly
RVM’s Quick-Attach System uses OEM Case® / New Holland® parts. All internal parts are replaceable at your local Case® / New Holland® Dealer.
In our experiences, the Case® / New Holland® design is one of the best on the market for retrofitting your older machine.
Why our Quick-Attach System is Better than our Competitor/s…
- Heavy-Duty Cast Steel Handles w/ OEM Parts
- Meets / exceeds OEM Standards & Quality
- Lowest cost, most versatile design on the market.
- Greaseable Pin & Bushing design
- All moveable internal parts are protected from dirt debris and damage
- Large surface area to weld on your cylinder mounts to the back of the latch box
- Thin assembly design helps keep the attachments closer to your machine for increased lift capacity
- Supports up to 2,750 lbs lift / 5,500 lbs tip weight on attachment (but only weighs 85 lbs)!
Includes w/ Kit:
Buyer will receive one Heavy Duty High-Quality Quick Attach Assembly complete with all internal parts, handles, springs, pins, bolts. This assembly will be shipped unpainted for ease of welding.
$450.00 -
![Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/7240780-324x324.png)
Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
$24.95 Add to cartAccess Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®
Access Cover Plates [7240780] for Clean-Out | Bobcat®
REPLACEMENT FOR BOBCAT PART #: 6716010
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
Included w/ Kit:
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$24.95 -
![Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6705223-324x324.png)
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
$24.95 Add to cartPivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for Bobcat Part #: 6700037
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
$24.95
