Description
Features
Hole for Grease Fitting
In stock (can be backordered)
$19.49
Bushing for Tilt Cylinder Rod End.
$19.49

This bushing is press-fit into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. These are hardened bushings and can easily be removed with a torch or air arc. This will greatly reduce the time needed to remove the old bushings.
Replacing these Bushings is required and will keep your machine operating like new. In certain cases of excessive wear these can be welded in as well.
![Compression Spring [6578253] for Quick-Attach Handle & Wedge | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/06/6578253-324x324.png)
The Compression Spring fits between the Wedge and your Quick-Attach Handle. These springs put pressure on the wedges to hold your attachment/s securely to your machine.
The springs simply wear out over time… Replacing them can help your Bob-Tach operate like new again.

Modify your existing equipment so it can be used on your skid steer or compact tractor.
Fits virtually any skid-steer or compact tractor manufactured after 1995 with Quick-Attach. Will fit some older models equipped with Quick Attach.
Quick attach plate is made of 5/16″ Grade 50 Steel

BOBCAT Bob-Tach Handle Kit


![Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6805150_Angle.png)
![Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6805150_Angle-T.png)
![Bushing [6805150] (Press-In/Weld-On) for Lower Tilt Cylinder | Bobcat® Bob-Tach - Image 4](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/6805150_Angle-V.png)

