Description
Dimensions
1.55″ ID
3″ OD
For Use With:
1.50″ OD Pin
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168_Diagram.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168_Diagram_FULL.png)
Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach
In stock (can be backordered)
$54.95
Bushing (Weld-On) [7140168] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95
| Dimensions | 3 in |
|---|---|
| Bobcat |
Additional information
| Dimensions | 3 in |
|---|---|
| Bobcat |
Contact River Valley Machine
Questions, Comments?
Related products
-
![RVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/7143508-LH_RVM-Kit-324x324.png)
RVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
$89.99 Add to cartRVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
River Valley Machine Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
COMPATIBLE BOBCAT® PART #’s: 7143508 | 6732537 | 6717284
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our Quick-Attach Mount Plate / Panel Repair Kit, you can replace actually replace the damaged portions of your Bob-Tach to help make it appear & operate like new again – without having to spend $1300+ buying a replacement Bob-Tach.
$89.99 -
![Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6705223-324x324.png)
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
$24.95 Add to cartPivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach
REPLACEMENT for Bobcat Part #: 6700037
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
$24.95 -
RVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
$450.00 Call RVM to OrderRVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
River Valley Machine Universal Quick-Attach Adapter Assembly
RVM’s Quick-Attach System uses OEM Case® / New Holland® parts. All internal parts are replaceable at your local Case® / New Holland® Dealer.
In our experiences, the Case® / New Holland® design is one of the best on the market for retrofitting your older machine.
Why our Quick-Attach System is Better than our Competitor/s…
- Heavy-Duty Cast Steel Handles w/ OEM Parts
- Meets / exceeds OEM Standards & Quality
- Lowest cost, most versatile design on the market.
- Greaseable Pin & Bushing design
- All moveable internal parts are protected from dirt debris and damage
- Large surface area to weld on your cylinder mounts to the back of the latch box
- Thin assembly design helps keep the attachments closer to your machine for increased lift capacity
- Supports up to 2,750 lbs lift / 5,500 lbs tip weight on attachment (but only weighs 85 lbs)!
Includes w/ Kit:
Buyer will receive one Heavy Duty High-Quality Quick Attach Assembly complete with all internal parts, handles, springs, pins, bolts. This assembly will be shipped unpainted for ease of welding.
$450.00
![Pivot Pin (Tapered) [87597878] for Quick-Attach Mount Plate | Case® / New Holland®](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/87597878-324x324.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168-324x324.png)