Description
Dimensions
1.55″ ID
3″ OD
For Use With:
1.50″ OD Pin
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168_Diagram.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168_Diagram_FULL.png)
Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach
In stock (can be backordered)
$54.95
Bushing (Weld-On) [7140168] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95
| Dimensions | 3 in |
|---|---|
| Bobcat |
Additional information
| Dimensions | 3 in |
|---|---|
| Bobcat |
Contact River Valley Machine
Questions, Comments?
Related products
-
Pivot Pin (Tapered) [7101078] w/ Bolt for Loader Arms / Lower Bob-Tach | Bobcat®
$25.95 Add to cartPivot Pin (Tapered) [7101078] w/ Bolt for Loader Arms / Lower Bob-Tach | Bobcat®
Pivot Pin (Tapered) [7101078] for Loader Arms / Lower Bob-Tach | Bobcat®
REPLACEMENT for BOBCAT PART #: 6734661
This Pivot Pin is used between your Skid-Steer’s Loader Arms and the Bob-Tach… These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing your pins can help make your Bobcat operate like new again!
Bolt Included with your order!
River Valley Machine will include 5/8″ Hex Bolt Grade 8
$25.95 -
RVM® Universal Quick-Attach Adapter Plate for Skid-Steer Loader
$100.00 Add to cartRVM® Universal Quick-Attach Adapter Plate for Skid-Steer Loader
Universal Quick-Attach Adapter Plate for Skid-Steer Loader
Modify your existing equipment so it can be used on your skid steer or compact tractor.
Fits virtually any skid-steer or compact tractor manufactured after 1995 with Quick-Attach. Will fit some older models equipped with Quick Attach.
Quick attach plate is made of 5/16″ Grade 50 Steel
$100.00 -
![RVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/7143508-LH_RVM-Kit-324x324.png)
RVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
$89.99 Add to cartRVM® Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
River Valley Machine Quick-Attach Panel / Mount Plate Repair Kit [7143508-LH] (3 Pieces) | Bobcat® Bob-Tach
COMPATIBLE BOBCAT® PART #’s: 7143508 | 6732537 | 6717284
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our Quick-Attach Mount Plate / Panel Repair Kit, you can replace actually replace the damaged portions of your Bob-Tach to help make it appear & operate like new again – without having to spend $1300+ buying a replacement Bob-Tach.
$89.99
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536-324x324.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168-324x324.png)