![Rod Eye [6804674] for Hydraulic Cylinder w/ Zerk on Bobcat Single-Tilt Machines](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6804674.png)
Only 3 left in stock
$109.95
Rod Eyes on Single-Tilt Hydraulic Cylinders wear out over time causing excessive slack in your pin. This Weld-On Rod Eye can help put your Tilt Cylinder back to safe specifications.
Does require the removal of old Tilt Cylinder Rod Eye and welding new one in place… Much less expensive than buying a new Rod or Tilt Cylinder.
$109.95
| Dimensions | 2.125 × 2.40 in |
|---|---|
| Bobcat | Bobcat 553, Bobcat 653, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat 853, Bobcat 863, Bobcat A220 (All-Wheel Steer), Bobcat S130, Bobcat T140, Bobcat T200 |
2.125″ Wide
2.40″ Tall
1.25″ ID
Pivot Pin (Solid) [6716601]
Pivot Pin w/ Zerk [6705223]
| Dimensions | 2.125 × 2.40 in |
|---|---|
| Bobcat | Bobcat 553, Bobcat 653, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat 853, Bobcat 863, Bobcat A220 (All-Wheel Steer), Bobcat S130, Bobcat T140, Bobcat T200 |
![Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6705223-324x324.png)
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
Bushing for Tilt Cylinder Rod End.
![RVM® Wedge Repair Kit [RH] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/01/Bobcat-Bob-Tach-Wedge-Repair-Kit_RH-324x324.jpg)
River Valley Machine, LLC sells both Left and Right Wedge Repair Kits…
![Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6737088-324x324.png)
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
This Pivot Pin is used between your Loader Arms and the Lift Cylinder. These pins simply wear out over time causing a lot of play with your Loader Arms. Replacing these pins can help make your Bobcat operate like new.
![Rod Eye [6804674] for Hydraulic Cylinder w/ Zerk on Bobcat Single-Tilt Machines](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6804674-324x324.png)
