Description
Dimensions
1.55″ ID
3″ OD
For Use With:
1.50″ OD Pin
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168_Diagram.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168_Diagram_FULL.png)
Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach
In stock (can be backordered)
$54.95
Bushing (Weld-On) [7140168] | Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing issues with your attachment.
Replacing your bushings is a whole lot less expensive than buying a new Bob-Tach! These are hardened bushings and can easily be removed with an air arch or torch – this will greatly reduce the time needed to remove the old bushings.
$54.95
| Dimensions | 3 in |
|---|---|
| Bobcat |
Additional information
| Dimensions | 3 in |
|---|---|
| Bobcat |
Contact River Valley Machine
Questions, Comments?
Related products
-
![Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/6704453_RVM-324x324.png)
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
RVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
$450.00 Call RVM to OrderRVM® Universal Quick-Attach Adapter / Mounting Plate Assembly
River Valley Machine Universal Quick-Attach Adapter Assembly
RVM’s Quick-Attach System uses OEM Case® / New Holland® parts. All internal parts are replaceable at your local Case® / New Holland® Dealer.
In our experiences, the Case® / New Holland® design is one of the best on the market for retrofitting your older machine.
Why our Quick-Attach System is Better than our Competitor/s…
- Heavy-Duty Cast Steel Handles w/ OEM Parts
- Meets / exceeds OEM Standards & Quality
- Lowest cost, most versatile design on the market.
- Greaseable Pin & Bushing design
- All moveable internal parts are protected from dirt debris and damage
- Large surface area to weld on your cylinder mounts to the back of the latch box
- Thin assembly design helps keep the attachments closer to your machine for increased lift capacity
- Supports up to 2,750 lbs lift / 5,500 lbs tip weight on attachment (but only weighs 85 lbs)!
Includes w/ Kit:
Buyer will receive one Heavy Duty High-Quality Quick Attach Assembly complete with all internal parts, handles, springs, pins, bolts. This assembly will be shipped unpainted for ease of welding.
$450.00 -
![Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/06/6704248-324x324.png)
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
$15.95 Add to cartPivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
$15.95
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536-324x324.png)
![Bushing [7140168] (Weld-On) for Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7140168-324x324.png)