Description
Dimensions
2.50″ OD
1.25″ ID
For Use With:
- 1.25″ OD Pin
![Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/6717259_Diagram.png)
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
In stock (can be backordered)
$25.95
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$25.95
| Weight | 0.4875 lbs |
|---|---|
| Bobcat | Bobcat 773, Bobcat A300 (All-Wheel Steer), Bobcat S150, Bobcat S160, Bobcat S175, Bobcat S185, Bobcat S205, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T180, Bobcat T190, Bobcat T250, Bobcat T300, Bobcat T320 |
Additional information
| Weight | 0.4875 lbs |
|---|---|
| Bobcat | Bobcat 773, Bobcat A300 (All-Wheel Steer), Bobcat S150, Bobcat S160, Bobcat S175, Bobcat S185, Bobcat S205, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T180, Bobcat T190, Bobcat T250, Bobcat T300, Bobcat T320 |
Contact River Valley Machine
Questions, Comments?
You may also like…
-
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
$32.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bob-Tach.
When replacing your old bushings in your Bob-Tach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$32.95
Related products
-
![Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/6704453_RVM-324x324.png)
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
$8.95 Add to cartCompression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
$8.95 -
Wedge Pin (Left) [6565190-LH] | Bobcat® Bob-Tach
Sale! Original price was: $46.95.$42.95Current price is: $42.95. Add to cartWedge Pin (Left) [6565190-LH] | Bobcat® Bob-Tach
Wedge Pin (Left) [6565190-LH] | Bobcat® Bob-Tach
The Wedge Pin attaches to the handles of a Bob-Tach. Wedges hold the Quick-Attach to the bucket or attachment. Wedges simply get rusty and worn out over time… Replacing them will help keep your Bob-Tach operating like new.
When sitting in your machine, this would be the Left-Side Wedge.
Original price was: $46.95.$42.95Current price is: $42.95. -
RVM® Universal Quick-Attach Adapter Plate for Skid-Steer Loader
$100.00 Add to cartRVM® Universal Quick-Attach Adapter Plate for Skid-Steer Loader
Universal Quick-Attach Adapter Plate for Skid-Steer Loader
Modify your existing equipment so it can be used on your skid steer or compact tractor.
Fits virtually any skid-steer or compact tractor manufactured after 1995 with Quick-Attach. Will fit some older models equipped with Quick Attach.
Quick attach plate is made of 5/16″ Grade 50 Steel
$100.00
![Pivot Pin (Tapered) [6730263] for Lower Lift Arm | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6730263-324x324.png)
![Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6737088-324x324.png)
