![Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6716601.png)
![Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/6716601_Diagram.png)
In stock (can be backordered)
$29.95
This Pivot Pin is used between the Lower Tilt Cylinder and your Bobcat® Bob-Tach.
This is a solid pivot pin – the pin does not have a grease zerk hole.
$29.95
| Weight | 1.9625 lbs |
|---|---|
| Dimensions | 4.60 × 1.25 in |
| Bobcat | Bobcat 553, Bobcat 653, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat 853, Bobcat 863, Bobcat A220 (All-Wheel Steer), Bobcat S130, Bobcat T140, Bobcat T200 |
Diameter is 1.25″ OD
Useable length is 4.60″
| Weight | 1.9625 lbs |
|---|---|
| Dimensions | 4.60 × 1.25 in |
| Bobcat | Bobcat 553, Bobcat 653, Bobcat 751, Bobcat 753, Bobcat 763, Bobcat 773, Bobcat 7753, Bobcat 853, Bobcat 863, Bobcat A220 (All-Wheel Steer), Bobcat S130, Bobcat T140, Bobcat T200 |
![Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6705223-324x324.png)
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
![Rod Eye [6804674] for Hydraulic Cylinder w/ Zerk on Bobcat Single-Tilt Machines](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6804674-324x324.png)
Rod Eyes on Single-Tilt Hydraulic Cylinders wear out over time causing excessive slack in your pin. This Weld-On Rod Eye can help put your Tilt Cylinder back to safe specifications.
Does require the removal of old Tilt Cylinder Rod Eye and welding new one in place… Much less expensive than buying a new Rod or Tilt Cylinder.
![Wedge Block [6565186] for Handle | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/01/6565186-324x324.png)
This Pivot Pin is used between your Loader Arms and the Lift Cylinder. These pins simply wear out over time causing a lot of play with your Loader Arms. Replacing these pins can help make your Bobcat operate like new.
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
![Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6716601-324x324.png)
