![Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/7240780.png)
![Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat® - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/7240780_Diagram.png)
![Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat® - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/7240780_Diagram_FULL.png)
![Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat® - Image 4](https://rivervalleymachineusa.com/wp-content/uploads/2019/09/7240780_Diagram_FULL-B.png)
Only 3 left in stock (can be backordered)
$24.95
Access Cover located on the loader’s drivetrain frames for easy access to the hydrostatic drive motor or to the track loader front idler.
These Clean-Out Plates are for use on machines using a 6.25″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair Access Cover Clean-Out Plates w / 4 Bolts
$24.95
Approximately 6.25″ x 5″
![RVM® Wedge Repair Kit [LH] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/01/Bobcat-Bob-Tach-Wedge-Repair-Kit_RH-324x324.jpg)
River Valley Machine, LLC sells both Left and Right Wedge Repair Kits…
![RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/7143508-RH_RVM-Kit-324x324.png)
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With this Repair Panel Plate Kit from River Valley Machine, you can replace these portions of your Bob-Tach to help make it appear & operate like new again, without spending $1300+ buying a new Bob-Tach.
When sitting inside your machine, this is for the Right Side panel.
![Pivot Pin [6705223] w/ Zerk for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6705223-324x324.png)
This Pivot Pin is used between your Bobcat® Bob-Tach and the Lower Tilt Cylinder.
This Pin features a grease zerk hole.
![Access Cover Plates (Squared) [7240780] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/7240780-324x324.png)