Description
Dimensions
2.57″ OD
2.25″ ID
2″ Length
For Use With:
2.25″ Loader Arm Pin [7170609]
In stock (can be backordered)
$34.95
This Bushing is press-fit into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach.
Replacing bushings is a whole lot cheaper than buying a new Bob-Tach, and can help keep your machine operating like new.
$34.95
| Weight | 4.34375 lbs |
|---|---|
| Dimensions | 2 × 2.57 in |
| Bobcat | Bobcat A770 (All-Wheel Steer), Bobcat S630, Bobcat S650, Bobcat S740, Bobcat S750, Bobcat S770, Bobcat S850, Bobcat T650, Bobcat T740, Bobcat T750, Bobcat T770, Bobcat T870 |
2.57″ OD
2.25″ ID
2″ Length
2.25″ Loader Arm Pin [7170609]
| Weight | 4.34375 lbs |
|---|---|
| Dimensions | 2 × 2.57 in |
| Bobcat | Bobcat A770 (All-Wheel Steer), Bobcat S630, Bobcat S650, Bobcat S740, Bobcat S750, Bobcat S770, Bobcat S850, Bobcat T650, Bobcat T740, Bobcat T750, Bobcat T770, Bobcat T870 |

This bushing is welded into your Bobcat® Bob-Tach. Bushings simply wear out over causing a lot of play in your Bob-Tach… Replacing these bushings is a whole lot cheaper than buying a new Loader Arm Assembly, and will help keep your machine operating like new.
Our Weld-On Bushing includes Bushing (Press-In) [7170615]
![Pivot Pin for Loader Arm / Bucket [7170609] | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/7170609-324x324.png)
Pivot Pins commonly wear out – or even break – causing a lot of issues with your Quick-Attach. Replacing these assemblies can help make your Skid-Steer Loader operate like new.
![Pivot Pin (SOLID) [6716601] for Lower Tilt Cylinder | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/05/6716601-324x324.png)
This Pivot Pin is used between the Lower Tilt Cylinder and your Bobcat® Bob-Tach.
This is a solid pivot pin – the pin does not have a grease zerk hole.
![Access Cover Plates (Rounded) [6737088] for Clean-Out | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/6737088-324x324.png)
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
![Pivot Wedge [6704248] for Quick-Attach Handle & Wedge Pin | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/06/6704248-324x324.png)
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.


![Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/7170615_Diagram.png)
![Bushing [7170615] (Press-In/Weld-On) Wear Bushing for Bobcat® Bob-Tach - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/08/7170615_Diagram_FULL.png)

