Description
Dimensions
2.50″ OD
1.25″ ID
For Use With:
- 1.25″ OD Pin
![Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/6717259_Diagram.png)
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
In stock (can be backordered)
$25.95
Bushing [6717259] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. The bushings eventually wear out causing a lot of play in your Bob-Tach. Replacing these weld-on bushings is a lot cheaper than buying a new Bob-Tach.
$25.95
| Weight | 0.4875 lbs |
|---|---|
| Bobcat | Bobcat 773, Bobcat A300 (All-Wheel Steer), Bobcat S150, Bobcat S160, Bobcat S175, Bobcat S185, Bobcat S205, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T180, Bobcat T190, Bobcat T250, Bobcat T300, Bobcat T320 |
Additional information
| Weight | 0.4875 lbs |
|---|---|
| Bobcat | Bobcat 773, Bobcat A300 (All-Wheel Steer), Bobcat S150, Bobcat S160, Bobcat S175, Bobcat S185, Bobcat S205, Bobcat S250, Bobcat S300, Bobcat S330, Bobcat T180, Bobcat T190, Bobcat T250, Bobcat T300, Bobcat T320 |
Contact River Valley Machine
Questions, Comments?
You may also like…
-
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
$32.95 Add to cartBushing [6717260] (Weld-On) for Bobcat® Bob-Tach
Bushing [6717260] (Weld-On) for Bobcat® Bob-Tach
This bushing is welded into your Bob-Tach. These wear out over time causing a lot of play in your Bob-Tach. Replacing these Weldon Bushings is a lot cheaper than buying a new Bob-Tach.
When replacing your old bushings in your Bob-Tach, we recommend you find a shop that has an Air Arc or Carbon Arc to remove old bushings. This will greatly reduce the time needed to remove the old bushings.
$32.95
Related products
-
Pivot Pin (Tapered) [7101078] w/ Bolt for Loader Arms / Lower Bob-Tach | Bobcat®
$25.95 Add to cartPivot Pin (Tapered) [7101078] w/ Bolt for Loader Arms / Lower Bob-Tach | Bobcat®
Pivot Pin (Tapered) [7101078] for Loader Arms / Lower Bob-Tach | Bobcat®
REPLACEMENT for BOBCAT PART #: 6734661
This Pivot Pin is used between your Skid-Steer’s Loader Arms and the Bob-Tach… These pins simply wear out over time causing a lot of play in your Bob-Tach.
Replacing your pins can help make your Bobcat operate like new again!
Bolt Included with your order!
River Valley Machine will include 5/8″ Hex Bolt Grade 8
$25.95 -
![RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/03/7143508-RH_RVM-Kit-324x324.png)
RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
$89.99 Add to cartRVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
RVM® Repair Panel for Mount Plate [7143508-RH] (3 Pieces) | Bobcat® Bob-Tach
A common failure of a Bobcat® Bob-Tach is the top portion of the Bob-Tach. OEM Material thickness is only ¼” – they simply wear thin, bend and eventually break over time. When this happens your attachments will fit loosely or fall off of your machine.
With this Repair Panel Plate Kit from River Valley Machine, you can replace these portions of your Bob-Tach to help make it appear & operate like new again, without spending $1300+ buying a new Bob-Tach.
When sitting inside your machine, this is for the Right Side panel.
$89.99 -
RVM® Universal Quick-Attach Adapter Plate for Skid-Steer Loader
$100.00 Add to cartRVM® Universal Quick-Attach Adapter Plate for Skid-Steer Loader
Universal Quick-Attach Adapter Plate for Skid-Steer Loader
Modify your existing equipment so it can be used on your skid steer or compact tractor.
Fits virtually any skid-steer or compact tractor manufactured after 1995 with Quick-Attach. Will fit some older models equipped with Quick Attach.
Quick attach plate is made of 5/16″ Grade 50 Steel
$100.00
