![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536.png)
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat® - Image 2](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536_Angle-L-Back-L.png)
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat® - Image 3](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536_Angle-L.png)
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat® - Image 4](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536_Angle-R.png)
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat® - Image 5](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536_Angle-R-Back.png)
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat® - Image 6](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536_Angle-Rear.png)
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat® - Image 7](https://rivervalleymachineusa.com/wp-content/uploads/2019/04/6717536_Diagram.png)
In stock (can be backordered)
$39.95
Our replacement Pivot Pin is used between your loader arms and the Bob-Tach.
Pivot Pins eventually wear out over time causing a lot of play in your Bob-Tach. Replacing your Pivot Pins can help make your Bobcat® operate like new.
$39.95
| Weight | 1.31875 lbs |
|---|---|
| Dimensions | 4.8 × 1.5 in |
| Bobcat |
1.5″ x 4.8″ Diameter
3/4-10″ Inside Thread
| Weight | 1.31875 lbs |
|---|---|
| Dimensions | 4.8 × 1.5 in |
| Bobcat |
This Bushing is press-fit into your Bob-Tach. Bushings simply wear out over time causing a lot of play in your Bob-Tach. Replacing these bushings is sometimes required, and can help keep your machine operating like new.
* In certain cases of excessive wear these can be welded in as well.
This bushing is welded onto your loader arm Tapered Pivot Pin locations.
The Tapered Holes wear out over time not allowing for the Tapered Pivot Pins to stay tight. Replacing these is a lot cheaper than buying a new Loader Arm Assembly.
Our HD Bushing is designed as a significant upgrade to OEM version.
![RVM® Wedge Repair Kit [RH] | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/01/Bobcat-Bob-Tach-Wedge-Repair-Kit_RH-324x324.jpg)
River Valley Machine, LLC sells both Left and Right Wedge Repair Kits…
![Compression Spring (Short) [6704453] for Quick-Attach Handle | Bobcat® Bob-Tach](https://rivervalleymachineusa.com/wp-content/uploads/2019/02/6704453_RVM-324x324.png)
The Handle Spring keeps the handles in the ‘up’ position and keeps the handles tight. Replacing the Handle Springs will help make your Bob-Tach operate like new.
IMPORTANT NOTE: Bobcat uses two (2) different handle springs. One is long, one is short. This is the short one with only 3 coil windings.
![Pivot Pin (Tapered) [6717536] for Lift Arms & Lower Bob-Tach | Bobcat®](https://rivervalleymachineusa.com/wp-content/uploads/2019/07/6717536-324x324.png)
