Description
Dimensions
1.5″ ID
In stock (can be backordered)
$59.95
This bushing is welded into your Bob-Tach®. The bushings simply wear out over time causing a lot of play in your attachment. Replacing these bushings is a lot cheaper than buying a new Bob-Tach®.
$59.95
Weight | 1.15 lbs |
---|---|
Bobcat | Bobcat 863, Bobcat 864, Bobcat A220 (All-Wheel Steer), Bobcat T200 |
Weight | 1.15 lbs |
---|---|
Bobcat | Bobcat 863, Bobcat 864, Bobcat A220 (All-Wheel Steer), Bobcat T200 |
One of the most common failures of a Bobcat Bob-Tach is the top portion of the Bob-Tach itself – OEM material thickness is only 1/4″ – they simply wear thin, bend and break over time. When this happens your attachments will fit loosely or fall off of your machine.
With our RVM Rebuild & Repair Panel Kit, you can replace these portions of your Bob-Tach to help make it appear & operate like new again – without spending $1300+ buying a new Bob-Tach.
Stock Photo of Bobcat 853, except this adapter mounts to the outside of Boom Arm the same as OEM.
Uses All OEM Compatible Parts which are available from RVM or your local Bobcat Dealer
Made In the USA by RVM, Not China
Upgrades include, 3/8 Top Ears and Faceplates vs OEM 1/4″, increased steel strength, 4 1/2″ Thick verticals vs OEM 1/4″, reinforced top ears, hardened bushings, Heavy Duty torque tube with 1/2″ Wall thickness to eliminate twisting and bending, with powder coat finish. Gauranteed to outlast an OEM Bob-Tach with a much better price.
Our Heavy-Duty Quick-Attach Adapter is built to similar specifications w/ material thickness similar to a T300. This Quick-Attach Adapter weighs 25 lbs. heavier than stock adapter.
Our Kit will be shipped with all handles, springs, wedges, and new bushings. Does not include tilt cylinder pins, loader arm pins, nor power Bob-Tach cylinder.
The Pivot Wedge works between the universal quick-attach handle and the wedge pin.
These Access Cover Plates are for use on machines using a 5.75″ x 5″ bolt pattern. Please check your bolt pattern prior to ordering.
1 Pair (x2) Access Cover Clean-Out Plates w / 4 Bolts
The Wedge Pin attaches to the handles of a Bob-Tach. Wedges hold the Quick-Attach to the bucket or attachment. Wedges simply get rusty and worn out over time… Replacing them will help keep your Bob-Tach operating like new.
When sitting in your machine, this would be the Left-Side Wedge.